From Alex.Rudnicky at cs.cmu.edu  Tue Feb  3 20:02:03 2015
From: Alex.Rudnicky at cs.cmu.edu (Alex Rudnicky)
Date: Tue, 3 Feb 2015 20:02:03 -0500
Subject: [Olympus developers 508]: repository changes
Message-ID: <11B6FA6BC9879A42BE5A6227C05F3E1F039398E75DE5@EXCH-MB-1.srv.cs.cmu.edu>

The Olympus repository has been relocated as part of a server reorganization.
Here are two announcements:

(1)
The current path, http://trac.speech.cs.cmu.edu/repos/olympus/ will continue to be available for the foreseeable future. However you should repoint to http://trac.speech.cs.cmu.edu/svn/olympus/, the new location.
This has been tested with TortoiseSVN and a direct http url. But hey, it's a complicated world.
Please report any problems to this mailing list as soon as you spot them.

One benefit of the update is that you can now see the entire repository tree from olympus/ and do not, for example, have to enter olympus/branches/ to see anything.

(2)
The currently active branch. 2.6, has been merged into the trunk. Please use trunk/ to retrieve (reasonably) stable versions of the code. The branch will go back to being development areas. The current version fixes some subtle bugs and it addresses some general issues, such as version creep in Visual Studio and other applications.
The build script now tries to find a most recent version on your computer. This is a better scheme in the long run. On the other hand it creates the possibility of build failures. PLEASE report these as soon as you experience such; make sure to include a copy of the build.log file. We will try to fix things right away.

( )
In any case, please report any problems to this mailing list. We will try to deal with them, though maybe other developers might be able to offer suggestions sooner.

Finally, the Olympus wiki has not as yet been updated to reflect the changes noted above. It will be in a few days. But in the meanwhile please report any problems so that we can fix them before updating the wiki.

Thanks,
Alex Rudnicky

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150203/91948727/attachment.html>

From vincentos87 at hotmail.com  Fri Feb  6 04:28:26 2015
From: vincentos87 at hotmail.com (vincentos87)
Date: Fri, 6 Feb 2015 10:28:26 +0100
Subject: [Olympus developers 509]: Where found the code of Phoenix?
Message-ID: <BLU436-SMTP1392FEBA6D6F52E707C43EDB1380@phx.gbl>

Dear developers Olympus.

I?m a student of the Catania University (Italy), i'm studying olympus 
and for research purpose i need the Phoenix parser source code (the link 
are offline). Please you can give me a link or  send me a copy of the code?

Thanks and Regards.

Vincenzo Sofia.


From mrmarge at cs.cmu.edu  Fri Feb  6 09:47:48 2015
From: mrmarge at cs.cmu.edu (Matthew Marge)
Date: Fri, 06 Feb 2015 14:47:48 +0000
Subject: [Olympus developers 510]: Re: Where found the code of Phoenix?
References: <BLU436-SMTP1392FEBA6D6F52E707C43EDB1380@phx.gbl>
Message-ID: <CAOGWWfdtGMnxW=qzU80-Rkn8kMu5iWNRm9c2C3zDLPCb8Z29ew@mail.gmail.com>

You should find the code here:
http://trac.speech.cs.cmu.edu/svn/olympus/trunk/Libraries/Phoenix/

On Fri Feb 06 2015 at 4:30:17 AM vincentos87 <vincentos87 at hotmail.com>
wrote:

> Dear developers Olympus.
>
> I?m a student of the Catania University (Italy), i'm studying olympus
> and for research purpose i need the Phoenix parser source code (the link
> are offline). Please you can give me a link or  send me a copy of the code?
>
> Thanks and Regards.
>
> Vincenzo Sofia.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150206/56424102/attachment.html>

From norvin.thomas at student.fh-kiel.de  Thu Feb 12 08:43:33 2015
From: norvin.thomas at student.fh-kiel.de (norvin.thomas at student.fh-kiel.de)
Date: Thu, 12 Feb 2015 14:43:33 +0100 (Mitteleuropäische Zeit   )
Subject: [Olympus developers 511]: Problem in running olypus dialouge system
Message-ID: <.149.222.51.146.1423748613.squirrel@student.fh-kiel.de>

Dear Sir\Madam

I have tried to install Olympus, but it not working for me.I read the
download page and install all the prerequisite softwares except Flite(Can
you please provide me the exact link for downloading Flite for windows).I
tried to run the OlympusBuild.pl but its create error for me.Please help
me to proceed. Attaching the error file
                       Thanks in advance


Kind Regards
Norvin Thomas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: olympus.PNG
Type: image/x-png
Size: 17549 bytes
Desc: not available
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150212/1d1bb752/attachment.bin>

From Alex.Rudnicky at cs.cmu.edu  Thu Feb 12 12:20:12 2015
From: Alex.Rudnicky at cs.cmu.edu (Alex Rudnicky)
Date: Thu, 12 Feb 2015 12:20:12 -0500
Subject: [Olympus developers 512]: Re: Problem in running olypus dialouge
 system
In-Reply-To: <.149.222.51.146.1423748613.squirrel@student.fh-kiel.de>
References: <.149.222.51.146.1423748613.squirrel@student.fh-kiel.de>
Message-ID: <11B6FA6BC9879A42BE5A6227C05F3E1F039398F7020B@EXCH-MB-1.srv.cs.cmu.edu>

You appear to be running the script from the perl/bin/ folder. 
You should be running it from the Olympus folder (e.g. Olympus/trunk/).
The script expects to find the .pm file in a relative sub-folder (Build/).

Something like: 
> perl OlympusBuild.pl 
should work, or
> C:\Perl\bin\perl OlympusBuild.pl

Alex


-----Original Message-----
From: Olympus-developers [mailto:olympus-developers-bounces at mailman.srv.cs.cmu.edu] On Behalf Of norvin.thomas at student.fh-kiel.de
Sent: Thursday, February 12, 2015 8:44 AM
To: olympus-developers at cs.cmu.edu
Subject: [Olympus developers 511]: Problem in running olypus dialouge system

Dear Sir\Madam

I have tried to install Olympus, but it not working for me.I read the download page and install all the prerequisite softwares except Flite(Can you please provide me the exact link for downloading Flite for windows).I tried to run the OlympusBuild.pl but its create error for me.Please help me to proceed. Attaching the error file
                       Thanks in advance


Kind Regards
Norvin Thomas


From norvin.thomas at student.fh-kiel.de  Fri Feb 13 06:47:12 2015
From: norvin.thomas at student.fh-kiel.de (norvin.thomas at student.fh-kiel.de)
Date: Fri, 13 Feb 2015 12:47:12 +0100 (Mitteleuropäische Zeit   )
Subject: [Olympus developers 513]: Re: Problem in running olypus dialouge
 system
In-Reply-To: <11B6FA6BC9879A42BE5A6227C05F3E1F039398F7020B@EXCH-MB-1.srv.cs.cmu.edu
 >
References: <.149.222.51.146.1423748613.squirrel@student.fh-kiel.de>
 <11B6FA6BC9879A42BE5A6227C05F3E1F039398F7020B@EXCH-MB-1.srv.cs.cmu.edu>
Message-ID: <.79.223.206.93.1423828032.squirrel@student.fh-kiel.de>

Hello Alex,

Thanks for your reply.I'm not that much familiar to perl,and I didn't
understand what you mentioned.Can you please explain me the first step I
have to do after the installation of prerequisite softwares.It would be a
great help for me to develop a dialogue system.
http://trac.speech.cs.cmu.edu/repos/olympus/tags/2.6.0,with the help of
this link how can I proceed further.IS it possible for you to explain me
the procedure in stepwise.

             Thanks in Advance
Kind regards
Norvin Thomas

 You appear to be running the script from the perl/bin/ folder.
> You should be running it from the Olympus folder (e.g. Olympus/trunk/).
> The script expects to find the .pm file in a relative sub-folder (Build/).
>
> Something like:
>> perl OlympusBuild.pl
> should work, or
>> C:\Perl\bin\perl OlympusBuild.pl
>
> Alex
>
>
> -----Original Message-----
> From: Olympus-developers
> [mailto:olympus-developers-bounces at mailman.srv.cs.cmu.edu] On Behalf Of
> norvin.thomas at student.fh-kiel.de
> Sent: Thursday, February 12, 2015 8:44 AM
> To: olympus-developers at cs.cmu.edu
> Subject: [Olympus developers 511]: Problem in running olypus dialouge
> system
>
> Dear Sir\Madam
>
> I have tried to install Olympus, but it not working for me.I read the
> download page and install all the prerequisite softwares except Flite(Can
> you please provide me the exact link for downloading Flite for windows).I
> tried to run the OlympusBuild.pl but its create error for me.Please help
> me to proceed. Attaching the error file
>                        Thanks in advance
>
>
> Kind Regards
> Norvin Thomas
>




From uyasa001 at fiu.edu  Thu Feb 12 19:53:32 2015
From: uyasa001 at fiu.edu (Ugan Yasavur)
Date: Thu, 12 Feb 2015 16:53:32 -0800
Subject: [Olympus developers 514]: Could not open bin\Release
Message-ID: <CAB0jr2w7Jc=Uz9fUcpOWKHczSAYPAhX6grBodNfYjeCeEyu1bg@mail.gmail.com>

Hello,

I am trying to run Olympus 2.6 in Windows 7. I installed all the perquisite
softwares with the correct version. However I am getting following problem
at the end of the build.

Could not open bin\Release for reading.
Do you have permission to read it's contents?


I shared below my build log. When I go to bin directory there is not a
folder named Release. I think I am stuck in this point.  I actually want to
only use RavenClaw, or Phoenix Ravenclaw Rosetta, I don't need TTS and
Speech. I am just sharing my intention if there is an alternative way to
make it work. I read that it is not possible to use RavenClaw as a
standalone dialog manager for now.

Thanks for the help.

===============

OLYMPUS_ROOT... .
BUILD_TYPE... Build
CMAKE_PARAMS... -D KALLIOPE_USE_FLITE:BOOL=yes -D KALLIOPE_USE_SAPI:BOOL=no
LOGIOS_ROOT... Tools\logios
BUILD_CONF... Release
BUILD_LOG... build.log
Windows
Searching for File::Spec Perl Module... Found
Searching for File::Copy Perl Module... Found
Searching for IPC::Open3 Perl Module... Found
Searching for IO::Handle Perl Module... Found
Searching for Getopt::Long Perl Module... Found
Searching for Win32 Perl Module... Found
Searching for Win32::API Perl Module... Found
Searching for Win32::TieRegistry Perl Module... Found
Creating bin\x86-nt directory for build output... Done
Searching for TortoiseSVN... Found
Checking if the project is using CMake... Yes
Searching for CMake 2.6 or higher... Searching for maximum valid Visual
Studio version... 12.0 Found. [32bit]
Searching for Sun Java JDK... Found
Searching for NetBeans Ant... Found 'C:\Program Files (x86)\NetBeans
8.0.2\extide\ant\bin\ant.bat'


---|>- Running command: "C:\Program Files\TortoiseSVN\bin\SubWCRev.exe"
"C:\Olympus" Build\SVN_Data_Template.h Build\SVN_Data.h -f
SubWCRev: 'C:\Olympus'

Last committed at revision 4563

Updated to revision 4563

Unversioned items found




---|>- Running command: "C:\Program Files (x86)\CMake\bin\cmake.exe" -G
"Visual Studio 12" -D KALLIOPE_USE_FLITE:BOOL=yes -D
KALLIOPE_USE_SAPI:BOOL=no ../..

---|>- Running command: "C:/Program Files
(x86)/MSBuild/12.0/bin/MSBuild.exe" "Olympus.sln" /m:4
/p:Configuration=Release /p:Platform=Win32
Microsoft (R) Build Engine version 12.0.31101.0

[Microsoft .NET Framework, version 4.0.30319.18408]

Copyright (C) Microsoft Corporation. All rights reserved.



Build started 2/12/2015 4:30:39 PM.

     1>Project "C:\Olympus\build\cmake\Olympus.sln" on node 1 (default
targets).

     1>ValidateSolutionConfiguration:

         Building solution configuration "Release|Win32".

     1>Done Building Project "C:\Olympus\build\cmake\Olympus.sln" (default
targets).



Build succeeded.

    0 Warning(s)

    0 Error(s)



Time Elapsed 00:00:00.45

Copying compiled executables and libraries from bin\Release to
bin\x86-nt.... Could not open bin\Release for reading.
Do you have permission to read it's contents?

--------------------------------------------------------------------------------------------------------
Build an ant script using C:\Program Files (x86)\NetBeans
8.0.2\extide\ant\bin\ant.bat
---|>- Running command: "C:\Program Files (x86)\NetBeans
8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\JavaTTY\build.xml
default
Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/3:javac

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/3:depend

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/3:junit

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/1:nbjpdastart

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/3:debug

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/1:java

  [javadoc] Warning: Leaving out empty argument '-windowtitle'

  [javadoc]
C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
warning: no @param for jconsole

  [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
jconsoleWrite, DrawingPad pad) {

  [javadoc]          ^

  [javadoc]
C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
warning: no @param for jconsoleWrite

  [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
jconsoleWrite, DrawingPad pad) {

  [javadoc]          ^

  [javadoc]
C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
warning: no @param for pad

  [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
jconsoleWrite, DrawingPad pad) {

  [javadoc]          ^

  [javadoc]
C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
warning: no @param for mainserver

  [javadoc]     public JavaTTYServer(MainServer mainserver, java.net.Socket
socket) throws IOException {

  [javadoc]            ^

  [javadoc]
C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
warning: no @param for socket

  [javadoc]     public JavaTTYServer(MainServer mainserver, java.net.Socket
socket) throws IOException {

  [javadoc]            ^

  [javadoc]
C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
warning: no @throws for java.io.IOException

  [javadoc]     public JavaTTYServer(MainServer mainserver, java.net.Socket
socket) throws IOException {

  [javadoc]            ^



BUILD SUCCESSFUL

Total time: 1 second


--------------------------------------------------------------------------------------------------------
Build an ant script using C:\Program Files (x86)\NetBeans
8.0.2\extide\ant\bin\ant.bat
---|>- Running command: "C:\Program Files (x86)\NetBeans
8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile
Libraries\libOlympusUtility\javaLibOlympusUtility\build.xml default
  [javadoc] Warning: Leaving out empty argument '-windowtitle'



BUILD SUCCESSFUL

Total time: 1 second


--------------------------------------------------------------------------------------------------------
Build an ant script using C:\Program Files (x86)\NetBeans
8.0.2\extide\ant\bin\ant.bat
---|>- Running command: "C:\Program Files (x86)\NetBeans
8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile
Agents\MultiDecoder\AMSwitcher\build.xml default
     [echo] To run this application from the command line without Ant, try:

     [echo] java -cp
"C:\Olympus\Libraries\Galaxy\contrib\MITRE\bindings\java\lib\galaxy.jar;C:\Olympus\Agents\MultiDecoder\AMSwitcher\dist\AMSwitcher.jar"
edu.cmu.olympus.amswitcher.AMSwitcher

  [javadoc] Warning: Leaving out empty argument '-windowtitle'

  [javadoc]
C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\olympus\amswitcher\AMSwitcher.java:163:
warning: no description for @param

  [javadoc]      * @param name

  [javadoc]        ^

  [javadoc]
C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\olympus\amswitcher\AMSwitcher.java:53:
warning: no @param for switcherHook

  [javadoc]     public AMSwitcher(AMSwitcherHook switcherHook) {

  [javadoc]            ^

  [javadoc]
C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\olympus\amswitcher\AMSwitcherHook.java:15:
warning: no @param for acousticModel

  [javadoc]     public void switchTo(String acousticModel);

  [javadoc]                 ^



BUILD SUCCESSFUL

Total time: 1 second


--------------------------------------------------------------------------------------------------------
Build an ant script using C:\Program Files (x86)\NetBeans
8.0.2\extide\ant\bin\ant.bat
---|>- Running command: "C:\Program Files (x86)\NetBeans
8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile
Agents\File2GFrames\build.xml default
Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/3:javac

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/3:depend

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/3:junit

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/1:nbjpdastart

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/3:debug

Trying to override old definition of task
http://www.netbeans.org/ns/j2se-project/1:java

  [javadoc] Warning: Leaving out empty argument '-windowtitle'

  [javadoc]
C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\file2gframes\File2GFramesServer.java:35:
warning: no @param for mainserver

  [javadoc]     public File2GFramesServer(MainServer mainserver,
java.net.Socket socket)

  [javadoc]            ^

  [javadoc]
C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\file2gframes\File2GFramesServer.java:35:
warning: no @param for socket

  [javadoc]     public File2GFramesServer(MainServer mainserver,
java.net.Socket socket)

  [javadoc]            ^

  [javadoc]
C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\file2gframes\File2GFramesServer.java:35:
warning: no @throws for java.io.IOException

  [javadoc]     public File2GFramesServer(MainServer mainserver,
java.net.Socket socket)

  [javadoc]            ^



BUILD SUCCESSFUL

Total time: 1 second




================================================================================
Build SUMMARY

Could not open bin\Release for reading.
Do you have permission to read it's contents?


time: 0:08
================================================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150212/f4652b3a/attachment.html>

From Alex.Rudnicky at cs.cmu.edu  Fri Feb 13 17:53:42 2015
From: Alex.Rudnicky at cs.cmu.edu (Alex Rudnicky)
Date: Fri, 13 Feb 2015 17:53:42 -0500
Subject: [Olympus developers 515]: Re: Could not open bin\Release
In-Reply-To: <CAB0jr2w7Jc=Uz9fUcpOWKHczSAYPAhX6grBodNfYjeCeEyu1bg@mail.gmail.com>
References: <CAB0jr2w7Jc=Uz9fUcpOWKHczSAYPAhX6grBodNfYjeCeEyu1bg@mail.gmail.com>
Message-ID: <11B6FA6BC9879A42BE5A6227C05F3E1F039398F70344@EXCH-MB-1.srv.cs.cmu.edu>

Ugan,

The immediate way to fix your problem is to create the folder bin\Release (and for good measure bin\x86).
Using the system without speech can be done by typing into the TTYRecognitionServer panel in the dashboard.
The system?s(text) response will appear in that window as well.

I see from the log that you are using a slightly out of date version of Olympus. Try this one:
http://trac.speech.cs.cmu.edu/svn/olympus/tags/2.6.0 (or the trunk version).

Finally, the instructions and hints for building the system have been (somewhat) amplified.
Check out: http://wiki.speech.cs.cmu.edu/olympus/index.php/Download

Alex



From: Olympus-developers [mailto:olympus-developers-bounces at mailman.srv.cs.cmu.edu] On Behalf Of Ugan Yasavur
Sent: Thursday, February 12, 2015 7:54 PM
To: olympus-developers at mailman.srv.cs.cmu.edu
Subject: [Olympus developers 514]: Could not open bin\Release

Hello,

I am trying to run Olympus 2.6 in Windows 7. I installed all the perquisite softwares with the correct version. However I am getting following problem at the end of the build.

Could not open bin\Release for reading.
Do you have permission to read it's contents?


I shared below my build log. When I go to bin directory there is not a folder named Release. I think I am stuck in this point.  I actually want to only use RavenClaw, or Phoenix Ravenclaw Rosetta, I don't need TTS and Speech. I am just sharing my intention if there is an alternative way to make it work. I read that it is not possible to use RavenClaw as a standalone dialog manager for now.

Thanks for the help.

===============

OLYMPUS_ROOT... .
BUILD_TYPE... Build
CMAKE_PARAMS... -D KALLIOPE_USE_FLITE:BOOL=yes -D KALLIOPE_USE_SAPI:BOOL=no
LOGIOS_ROOT... Tools\logios
BUILD_CONF... Release
BUILD_LOG... build.log
Windows
Searching for File::Spec Perl Module... Found
Searching for File::Copy Perl Module... Found
Searching for IPC::Open3 Perl Module... Found
Searching for IO::Handle Perl Module... Found
Searching for Getopt::Long Perl Module... Found
Searching for Win32 Perl Module... Found
Searching for Win32::API Perl Module... Found
Searching for Win32::TieRegistry Perl Module... Found
Creating bin\x86-nt directory for build output... Done
Searching for TortoiseSVN... Found
Checking if the project is using CMake... Yes
Searching for CMake 2.6 or higher... Searching for maximum valid Visual Studio version... 12.0 Found. [32bit]
Searching for Sun Java JDK... Found
Searching for NetBeans Ant... Found 'C:\Program Files (x86)\NetBeans 8.0.2\extide\ant\bin\ant.bat'


---|>- Running command: "C:\Program Files\TortoiseSVN\bin\SubWCRev.exe" "C:\Olympus" Build\SVN_Data_Template.h Build\SVN_Data.h -f
SubWCRev: 'C:\Olympus'

Last committed at revision 4563

Updated to revision 4563

Unversioned items found




---|>- Running command: "C:\Program Files (x86)\CMake\bin\cmake.exe" -G "Visual Studio 12" -D KALLIOPE_USE_FLITE:BOOL=yes -D KALLIOPE_USE_SAPI:BOOL=no ../..

---|>- Running command: "C:/Program Files (x86)/MSBuild/12.0/bin/MSBuild.exe" "Olympus.sln" /m:4 /p:Configuration=Release /p:Platform=Win32
Microsoft (R) Build Engine version 12.0.31101.0

[Microsoft .NET Framework, version 4.0.30319.18408]

Copyright (C) Microsoft Corporation. All rights reserved.



Build started 2/12/2015 4:30:39 PM.

     1>Project "C:\Olympus\build\cmake\Olympus.sln" on node 1 (default targets).

     1>ValidateSolutionConfiguration:

         Building solution configuration "Release|Win32".

     1>Done Building Project "C:\Olympus\build\cmake\Olympus.sln" (default targets).



Build succeeded.

    0 Warning(s)

    0 Error(s)



Time Elapsed 00:00:00.45

Copying compiled executables and libraries from bin\Release to bin\x86-nt.... Could not open bin\Release for reading.
Do you have permission to read it's contents?

--------------------------------------------------------------------------------------------------------
Build an ant script using C:\Program Files (x86)\NetBeans 8.0.2\extide\ant\bin\ant.bat
---|>- Running command: "C:\Program Files (x86)\NetBeans 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\JavaTTY\build.xml default
Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/3:javac

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/3:depend

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/3:junit

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/1:nbjpdastart

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/3:debug

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/1:java

  [javadoc] Warning: Leaving out empty argument '-windowtitle'

  [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30: warning: no @param for jconsole

  [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole jconsoleWrite, DrawingPad pad) {

  [javadoc]          ^

  [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30: warning: no @param for jconsoleWrite

  [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole jconsoleWrite, DrawingPad pad) {

  [javadoc]          ^

  [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30: warning: no @param for pad

  [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole jconsoleWrite, DrawingPad pad) {

  [javadoc]          ^

  [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23: warning: no @param for mainserver

  [javadoc]     public JavaTTYServer(MainServer mainserver, java.net.Socket socket) throws IOException {

  [javadoc]            ^

  [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23: warning: no @param for socket

  [javadoc]     public JavaTTYServer(MainServer mainserver, java.net.Socket socket) throws IOException {

  [javadoc]            ^

  [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23: warning: no @throws for java.io.IOException

  [javadoc]     public JavaTTYServer(MainServer mainserver, java.net.Socket socket) throws IOException {

  [javadoc]            ^



BUILD SUCCESSFUL

Total time: 1 second


--------------------------------------------------------------------------------------------------------
Build an ant script using C:\Program Files (x86)\NetBeans 8.0.2\extide\ant\bin\ant.bat
---|>- Running command: "C:\Program Files (x86)\NetBeans 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Libraries\libOlympusUtility\javaLibOlympusUtility\build.xml default
  [javadoc] Warning: Leaving out empty argument '-windowtitle'



BUILD SUCCESSFUL

Total time: 1 second


--------------------------------------------------------------------------------------------------------
Build an ant script using C:\Program Files (x86)\NetBeans 8.0.2\extide\ant\bin\ant.bat
---|>- Running command: "C:\Program Files (x86)\NetBeans 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\MultiDecoder\AMSwitcher\build.xml default
     [echo] To run this application from the command line without Ant, try:

     [echo] java -cp "C:\Olympus\Libraries\Galaxy\contrib\MITRE\bindings\java\lib\galaxy.jar;C:\Olympus\Agents\MultiDecoder\AMSwitcher\dist\AMSwitcher.jar" edu.cmu.olympus.amswitcher.AMSwitcher

  [javadoc] Warning: Leaving out empty argument '-windowtitle'

  [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\olympus\amswitcher\AMSwitcher.java:163: warning: no description for @param

  [javadoc]      * @param name

  [javadoc]        ^

  [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\olympus\amswitcher\AMSwitcher.java:53: warning: no @param for switcherHook

  [javadoc]     public AMSwitcher(AMSwitcherHook switcherHook) {

  [javadoc]            ^

  [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\olympus\amswitcher\AMSwitcherHook.java:15: warning: no @param for acousticModel

  [javadoc]     public void switchTo(String acousticModel);

  [javadoc]                 ^



BUILD SUCCESSFUL

Total time: 1 second


--------------------------------------------------------------------------------------------------------
Build an ant script using C:\Program Files (x86)\NetBeans 8.0.2\extide\ant\bin\ant.bat
---|>- Running command: "C:\Program Files (x86)\NetBeans 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\File2GFrames\build.xml default
Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/3:javac

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/3:depend

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/3:junit

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/1:nbjpdastart

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/3:debug

Trying to override old definition of task http://www.netbeans.org/ns/j2se-project/1:java

  [javadoc] Warning: Leaving out empty argument '-windowtitle'

  [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\file2gframes\File2GFramesServer.java:35: warning: no @param for mainserver

  [javadoc]     public File2GFramesServer(MainServer mainserver, java.net.Socket socket)

  [javadoc]            ^

  [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\file2gframes\File2GFramesServer.java:35: warning: no @param for socket

  [javadoc]     public File2GFramesServer(MainServer mainserver, java.net.Socket socket)

  [javadoc]            ^

  [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\file2gframes\File2GFramesServer.java:35: warning: no @throws for java.io.IOException

  [javadoc]     public File2GFramesServer(MainServer mainserver, java.net.Socket socket)

  [javadoc]            ^



BUILD SUCCESSFUL

Total time: 1 second




================================================================================
Build SUMMARY

Could not open bin\Release for reading.
Do you have permission to read it's contents?


time: 0:08
================================================================================

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150213/595be0e4/attachment-0001.html>

From uyasa001 at fiu.edu  Fri Feb 13 15:35:51 2015
From: uyasa001 at fiu.edu (Ugan Yasavur)
Date: Fri, 13 Feb 2015 12:35:51 -0800
Subject: [Olympus developers 516]: Re: Could not open bin\Release
In-Reply-To: <CAB0jr2w7Jc=Uz9fUcpOWKHczSAYPAhX6grBodNfYjeCeEyu1bg@mail.gmail.com>
References: <CAB0jr2w7Jc=Uz9fUcpOWKHczSAYPAhX6grBodNfYjeCeEyu1bg@mail.gmail.com>
Message-ID: <CAB0jr2w+K3GXcYoAQoSiXxMZPQ-X9MAy=DufpTELP0zya3dsEw@mail.gmail.com>

Hello,

I actually solved the problem above. I asked the question one day ago.

I am in the stage of running an example system. I think only example system
that is compatible with version 2.6 is Mandeleine. I could able to build
the version in Trunk folder, but the version in Branches\2.6 does not
build. It tells that there is a syntax error in perl script.

So application starts, and everything is green (used SystemRunFlite.bat).
As soon as I write "init_session" to "TTYRecognitionServer", Apollo stops
working. I can restart Apollo but I don't know is it same thing for the
whole system. I write some messages to TTYRecognitionServer, such as "hi",
"I have fever" etc.. I can see that phoenix is parsing my inputs, NLG
Server and MandeleineNLG does not generate any output. I am not sure if
RavenClaw do anything. I do not hear any TTS voice..

It would be great if I could only use Phoenix + RavenClaw or RavenClaw
only. My goal is to create new system by using RavenClaw.

Thanks for the help.
Ugan


On Thu, Feb 12, 2015 at 4:53 PM, Ugan Yasavur <uyasa001 at fiu.edu> wrote:

> Hello,
>
> I am trying to run Olympus 2.6 in Windows 7. I installed all the
> perquisite softwares with the correct version. However I am getting
> following problem at the end of the build.
>
> Could not open bin\Release for reading.
> Do you have permission to read it's contents?
>
>
> I shared below my build log. When I go to bin directory there is not a
> folder named Release. I think I am stuck in this point.  I actually want to
> only use RavenClaw, or Phoenix Ravenclaw Rosetta, I don't need TTS and
> Speech. I am just sharing my intention if there is an alternative way to
> make it work. I read that it is not possible to use RavenClaw as a
> standalone dialog manager for now.
>
> Thanks for the help.
>
> ===============
>
> OLYMPUS_ROOT... .
> BUILD_TYPE... Build
> CMAKE_PARAMS... -D KALLIOPE_USE_FLITE:BOOL=yes -D KALLIOPE_USE_SAPI:BOOL=no
> LOGIOS_ROOT... Tools\logios
> BUILD_CONF... Release
> BUILD_LOG... build.log
> Windows
> Searching for File::Spec Perl Module... Found
> Searching for File::Copy Perl Module... Found
> Searching for IPC::Open3 Perl Module... Found
> Searching for IO::Handle Perl Module... Found
> Searching for Getopt::Long Perl Module... Found
> Searching for Win32 Perl Module... Found
> Searching for Win32::API Perl Module... Found
> Searching for Win32::TieRegistry Perl Module... Found
> Creating bin\x86-nt directory for build output... Done
> Searching for TortoiseSVN... Found
> Checking if the project is using CMake... Yes
> Searching for CMake 2.6 or higher... Searching for maximum valid Visual
> Studio version... 12.0 Found. [32bit]
> Searching for Sun Java JDK... Found
> Searching for NetBeans Ant... Found 'C:\Program Files (x86)\NetBeans
> 8.0.2\extide\ant\bin\ant.bat'
>
>
> ---|>- Running command: "C:\Program Files\TortoiseSVN\bin\SubWCRev.exe"
> "C:\Olympus" Build\SVN_Data_Template.h Build\SVN_Data.h -f
> SubWCRev: 'C:\Olympus'
>
> Last committed at revision 4563
>
> Updated to revision 4563
>
> Unversioned items found
>
>
>
>
> ---|>- Running command: "C:\Program Files (x86)\CMake\bin\cmake.exe" -G
> "Visual Studio 12" -D KALLIOPE_USE_FLITE:BOOL=yes -D
> KALLIOPE_USE_SAPI:BOOL=no ../..
>
> ---|>- Running command: "C:/Program Files
> (x86)/MSBuild/12.0/bin/MSBuild.exe" "Olympus.sln" /m:4
> /p:Configuration=Release /p:Platform=Win32
> Microsoft (R) Build Engine version 12.0.31101.0
>
> [Microsoft .NET Framework, version 4.0.30319.18408]
>
> Copyright (C) Microsoft Corporation. All rights reserved.
>
>
>
> Build started 2/12/2015 4:30:39 PM.
>
>      1>Project "C:\Olympus\build\cmake\Olympus.sln" on node 1 (default
> targets).
>
>      1>ValidateSolutionConfiguration:
>
>          Building solution configuration "Release|Win32".
>
>      1>Done Building Project "C:\Olympus\build\cmake\Olympus.sln" (default
> targets).
>
>
>
> Build succeeded.
>
>     0 Warning(s)
>
>     0 Error(s)
>
>
>
> Time Elapsed 00:00:00.45
>
> Copying compiled executables and libraries from bin\Release to
> bin\x86-nt.... Could not open bin\Release for reading.
> Do you have permission to read it's contents?
>
>
> --------------------------------------------------------------------------------------------------------
> Build an ant script using C:\Program Files (x86)\NetBeans
> 8.0.2\extide\ant\bin\ant.bat
> ---|>- Running command: "C:\Program Files (x86)\NetBeans
> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\JavaTTY\build.xml
> default
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/3:javac
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/3:depend
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/3:junit
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/1:nbjpdastart
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/3:debug
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/1:java
>
>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>
>   [javadoc]
> C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
> warning: no @param for jconsole
>
>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
> jconsoleWrite, DrawingPad pad) {
>
>   [javadoc]          ^
>
>   [javadoc]
> C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
> warning: no @param for jconsoleWrite
>
>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
> jconsoleWrite, DrawingPad pad) {
>
>   [javadoc]          ^
>
>   [javadoc]
> C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
> warning: no @param for pad
>
>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
> jconsoleWrite, DrawingPad pad) {
>
>   [javadoc]          ^
>
>   [javadoc]
> C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
> warning: no @param for mainserver
>
>   [javadoc]     public JavaTTYServer(MainServer mainserver,
> java.net.Socket socket) throws IOException {
>
>   [javadoc]            ^
>
>   [javadoc]
> C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
> warning: no @param for socket
>
>   [javadoc]     public JavaTTYServer(MainServer mainserver,
> java.net.Socket socket) throws IOException {
>
>   [javadoc]            ^
>
>   [javadoc]
> C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
> warning: no @throws for java.io.IOException
>
>   [javadoc]     public JavaTTYServer(MainServer mainserver,
> java.net.Socket socket) throws IOException {
>
>   [javadoc]            ^
>
>
>
> BUILD SUCCESSFUL
>
> Total time: 1 second
>
>
>
> --------------------------------------------------------------------------------------------------------
> Build an ant script using C:\Program Files (x86)\NetBeans
> 8.0.2\extide\ant\bin\ant.bat
> ---|>- Running command: "C:\Program Files (x86)\NetBeans
> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile
> Libraries\libOlympusUtility\javaLibOlympusUtility\build.xml default
>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>
>
>
> BUILD SUCCESSFUL
>
> Total time: 1 second
>
>
>
> --------------------------------------------------------------------------------------------------------
> Build an ant script using C:\Program Files (x86)\NetBeans
> 8.0.2\extide\ant\bin\ant.bat
> ---|>- Running command: "C:\Program Files (x86)\NetBeans
> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile
> Agents\MultiDecoder\AMSwitcher\build.xml default
>      [echo] To run this application from the command line without Ant, try:
>
>      [echo] java -cp
> "C:\Olympus\Libraries\Galaxy\contrib\MITRE\bindings\java\lib\galaxy.jar;C:\Olympus\Agents\MultiDecoder\AMSwitcher\dist\AMSwitcher.jar"
> edu.cmu.olympus.amswitcher.AMSwitcher
>
>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>
>   [javadoc]
> C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\olympus\amswitcher\AMSwitcher.java:163:
> warning: no description for @param
>
>   [javadoc]      * @param name
>
>   [javadoc]        ^
>
>   [javadoc]
> C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\olympus\amswitcher\AMSwitcher.java:53:
> warning: no @param for switcherHook
>
>   [javadoc]     public AMSwitcher(AMSwitcherHook switcherHook) {
>
>   [javadoc]            ^
>
>   [javadoc]
> C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\olympus\amswitcher\AMSwitcherHook.java:15:
> warning: no @param for acousticModel
>
>   [javadoc]     public void switchTo(String acousticModel);
>
>   [javadoc]                 ^
>
>
>
> BUILD SUCCESSFUL
>
> Total time: 1 second
>
>
>
> --------------------------------------------------------------------------------------------------------
> Build an ant script using C:\Program Files (x86)\NetBeans
> 8.0.2\extide\ant\bin\ant.bat
> ---|>- Running command: "C:\Program Files (x86)\NetBeans
> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile
> Agents\File2GFrames\build.xml default
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/3:javac
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/3:depend
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/3:junit
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/1:nbjpdastart
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/3:debug
>
> Trying to override old definition of task
> http://www.netbeans.org/ns/j2se-project/1:java
>
>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>
>   [javadoc]
> C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\file2gframes\File2GFramesServer.java:35:
> warning: no @param for mainserver
>
>   [javadoc]     public File2GFramesServer(MainServer mainserver,
> java.net.Socket socket)
>
>   [javadoc]            ^
>
>   [javadoc]
> C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\file2gframes\File2GFramesServer.java:35:
> warning: no @param for socket
>
>   [javadoc]     public File2GFramesServer(MainServer mainserver,
> java.net.Socket socket)
>
>   [javadoc]            ^
>
>   [javadoc]
> C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\file2gframes\File2GFramesServer.java:35:
> warning: no @throws for java.io.IOException
>
>   [javadoc]     public File2GFramesServer(MainServer mainserver,
> java.net.Socket socket)
>
>   [javadoc]            ^
>
>
>
> BUILD SUCCESSFUL
>
> Total time: 1 second
>
>
>
>
>
> ================================================================================
> Build SUMMARY
>
> Could not open bin\Release for reading.
> Do you have permission to read it's contents?
>
>
> time: 0:08
>
> ================================================================================
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150213/654afb02/attachment-0001.html>

From mmarge at gmail.com  Sat Feb 14 11:26:20 2015
From: mmarge at gmail.com (Matthew Marge)
Date: Sat, 14 Feb 2015 16:26:20 +0000
Subject: [Olympus developers 517]: Re: Could not open bin\Release
Message-ID: <CAOGWWfcKnDjF_7NzT-vTsWavjPK-+Xiqv2KDi8FGZN9jQN9-MA@mail.gmail.com>

This is a known issue. We will be applying the fix some time this week. In
the near term, please read below:

The root of the problem is with the session_timeout flag in Apollo.cfg in
the project. Commenting out/removing the flag allows the project to
function.

 If you want to have session_timeout enabled, you can edit the code below:

I found the bug in SessionAgent.cpp. Upon entering "init_session" with an
active flag for "session_timeout" the program crashes on this line:

SessionAgent.cpp: Line 130
Log(AGENTS_STREAM, "Session Agent Configuration: session_timeout=%s",
sSessionTimeOut);

The fix:
Log(AGENTS_STREAM, "Session Agent Configuration: session_timeout=%s",
sSessionTimeOut.c_str());

Thanks,
Matt
On Sat, Feb 14, 2015 at 5:24 AM Ugan Yasavur <uyasa001 at fiu.edu> wrote:

> Hello,
>
> I actually solved the problem above. I asked the question one day ago.
>
> I am in the stage of running an example system. I think only example
> system that is compatible with version 2.6 is Mandeleine. I could able to
> build the version in Trunk folder, but the version in Branches\2.6 does not
> build. It tells that there is a syntax error in perl script.
>
> So application starts, and everything is green (used SystemRunFlite.bat).
> As soon as I write "init_session" to "TTYRecognitionServer", Apollo stops
> working. I can restart Apollo but I don't know is it same thing for the
> whole system. I write some messages to TTYRecognitionServer, such as "hi",
> "I have fever" etc.. I can see that phoenix is parsing my inputs, NLG
> Server and MandeleineNLG does not generate any output. I am not sure if
> RavenClaw do anything. I do not hear any TTS voice..
>
> It would be great if I could only use Phoenix + RavenClaw or RavenClaw
> only. My goal is to create new system by using RavenClaw.
>
> Thanks for the help.
> Ugan
>
>
> On Thu, Feb 12, 2015 at 4:53 PM, Ugan Yasavur <uyasa001 at fiu.edu> wrote:
>
>> Hello,
>>
>> I am trying to run Olympus 2.6 in Windows 7. I installed all the
>> perquisite softwares with the correct version. However I am getting
>> following problem at the end of the build.
>>
>> Could not open bin\Release for reading.
>> Do you have permission to read it's contents?
>>
>>
>> I shared below my build log. When I go to bin directory there is not a
>> folder named Release. I think I am stuck in this point.  I actually want to
>> only use RavenClaw, or Phoenix Ravenclaw Rosetta, I don't need TTS and
>> Speech. I am just sharing my intention if there is an alternative way to
>> make it work. I read that it is not possible to use RavenClaw as a
>> standalone dialog manager for now.
>>
>> Thanks for the help.
>>
>> ===============
>>
>> OLYMPUS_ROOT... .
>> BUILD_TYPE... Build
>> CMAKE_PARAMS... -D KALLIOPE_USE_FLITE:BOOL=yes -D
>> KALLIOPE_USE_SAPI:BOOL=no
>> LOGIOS_ROOT... Tools\logios
>> BUILD_CONF... Release
>> BUILD_LOG... build.log
>> Windows
>> Searching for File::Spec Perl Module... Found
>> Searching for File::Copy Perl Module... Found
>> Searching for IPC::Open3 Perl Module... Found
>> Searching for IO::Handle Perl Module... Found
>> Searching for Getopt::Long Perl Module... Found
>> Searching for Win32 Perl Module... Found
>> Searching for Win32::API Perl Module... Found
>> Searching for Win32::TieRegistry Perl Module... Found
>> Creating bin\x86-nt directory for build output... Done
>> Searching for TortoiseSVN... Found
>> Checking if the project is using CMake... Yes
>> Searching for CMake 2.6 or higher... Searching for maximum valid Visual
>> Studio version... 12.0 Found. [32bit]
>> Searching for Sun Java JDK... Found
>> Searching for NetBeans Ant... Found 'C:\Program Files (x86)\NetBeans
>> 8.0.2\extide\ant\bin\ant.bat'
>>
>>
>> ---|>- Running command: "C:\Program Files\TortoiseSVN\bin\SubWCRev.exe"
>> "C:\Olympus" Build\SVN_Data_Template.h Build\SVN_Data.h -f
>> SubWCRev: 'C:\Olympus'
>>
>> Last committed at revision 4563
>>
>> Updated to revision 4563
>>
>> Unversioned items found
>>
>>
>>
>>
>> ---|>- Running command: "C:\Program Files (x86)\CMake\bin\cmake.exe" -G
>> "Visual Studio 12" -D KALLIOPE_USE_FLITE:BOOL=yes -D
>> KALLIOPE_USE_SAPI:BOOL=no ../..
>>
>> ---|>- Running command: "C:/Program Files (x86)/MSBuild/12.0/bin/MSBuild.exe"
>> "Olympus.sln" /m:4 /p:Configuration=Release /p:Platform=Win32
>> Microsoft (R) Build Engine version 12.0.31101.0
>>
>> [Microsoft .NET Framework, version 4.0.30319.18408]
>>
>> Copyright (C) Microsoft Corporation. All rights reserved.
>>
>>
>>
>> Build started 2/12/2015 4:30:39 PM.
>>
>>      1>Project "C:\Olympus\build\cmake\Olympus.sln" on node 1 (default
>> targets).
>>
>>      1>ValidateSolutionConfiguration:
>>
>>          Building solution configuration "Release|Win32".
>>
>>      1>Done Building Project "C:\Olympus\build\cmake\Olympus.sln"
>> (default targets).
>>
>>
>>
>> Build succeeded.
>>
>>     0 Warning(s)
>>
>>     0 Error(s)
>>
>>
>>
>> Time Elapsed 00:00:00.45
>>
>> Copying compiled executables and libraries from bin\Release to
>> bin\x86-nt.... Could not open bin\Release for reading.
>> Do you have permission to read it's contents?
>>
>> ------------------------------------------------------------
>> --------------------------------------------
>> Build an ant script using C:\Program Files (x86)\NetBeans
>> 8.0.2\extide\ant\bin\ant.bat
>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\JavaTTY\build.xml
>> default
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/3:javac
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/3:depend
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/3:junit
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/1:nbjpdastart
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/3:debug
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/1:java
>>
>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>
>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
>> warning: no @param for jconsole
>>
>>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
>> jconsoleWrite, DrawingPad pad) {
>>
>>   [javadoc]          ^
>>
>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
>> warning: no @param for jconsoleWrite
>>
>>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
>> jconsoleWrite, DrawingPad pad) {
>>
>>   [javadoc]          ^
>>
>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
>> warning: no @param for pad
>>
>>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
>> jconsoleWrite, DrawingPad pad) {
>>
>>   [javadoc]          ^
>>
>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
>> warning: no @param for mainserver
>>
>>   [javadoc]     public JavaTTYServer(MainServer mainserver,
>> java.net.Socket socket) throws IOException {
>>
>>   [javadoc]            ^
>>
>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
>> warning: no @param for socket
>>
>>   [javadoc]     public JavaTTYServer(MainServer mainserver,
>> java.net.Socket socket) throws IOException {
>>
>>   [javadoc]            ^
>>
>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
>> warning: no @throws for java.io.IOException
>>
>>   [javadoc]     public JavaTTYServer(MainServer mainserver,
>> java.net.Socket socket) throws IOException {
>>
>>   [javadoc]            ^
>>
>>
>>
>> BUILD SUCCESSFUL
>>
>> Total time: 1 second
>>
>>
>> ------------------------------------------------------------
>> --------------------------------------------
>> Build an ant script using C:\Program Files (x86)\NetBeans
>> 8.0.2\extide\ant\bin\ant.bat
>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Libraries\libOlympusUtility\
>> javaLibOlympusUtility\build.xml default
>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>
>>
>>
>> BUILD SUCCESSFUL
>>
>> Total time: 1 second
>>
>>
>> ------------------------------------------------------------
>> --------------------------------------------
>> Build an ant script using C:\Program Files (x86)\NetBeans
>> 8.0.2\extide\ant\bin\ant.bat
>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\MultiDecoder\
>> AMSwitcher\build.xml default
>>      [echo] To run this application from the command line without Ant,
>> try:
>>
>>      [echo] java -cp "C:\Olympus\Libraries\Galaxy\c
>> ontrib\MITRE\bindings\java\lib\galaxy.jar;C:\Olympus\Agents\MultiDecoder\
>> AMSwitcher\dist\AMSwitcher.jar" edu.cmu.olympus.amswitcher.AMSwitcher
>>
>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>
>>   [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\
>> olympus\amswitcher\AMSwitcher.java:163: warning: no description for
>> @param
>>
>>   [javadoc]      * @param name
>>
>>   [javadoc]        ^
>>
>>   [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\
>> olympus\amswitcher\AMSwitcher.java:53: warning: no @param for
>> switcherHook
>>
>>   [javadoc]     public AMSwitcher(AMSwitcherHook switcherHook) {
>>
>>   [javadoc]            ^
>>
>>   [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\
>> olympus\amswitcher\AMSwitcherHook.java:15: warning: no @param for
>> acousticModel
>>
>>   [javadoc]     public void switchTo(String acousticModel);
>>
>>   [javadoc]                 ^
>>
>>
>>
>> BUILD SUCCESSFUL
>>
>> Total time: 1 second
>>
>>
>> ------------------------------------------------------------
>> --------------------------------------------
>> Build an ant script using C:\Program Files (x86)\NetBeans
>> 8.0.2\extide\ant\bin\ant.bat
>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile
>> Agents\File2GFrames\build.xml default
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/3:javac
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/3:depend
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/3:junit
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/1:nbjpdastart
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/3:debug
>>
>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>> e-project/1:java
>>
>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>
>>   [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\
>> file2gframes\File2GFramesServer.java:35: warning: no @param for
>> mainserver
>>
>>   [javadoc]     public File2GFramesServer(MainServer mainserver,
>> java.net.Socket socket)
>>
>>   [javadoc]            ^
>>
>>   [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\
>> file2gframes\File2GFramesServer.java:35: warning: no @param for socket
>>
>>   [javadoc]     public File2GFramesServer(MainServer mainserver,
>> java.net.Socket socket)
>>
>>   [javadoc]            ^
>>
>>   [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\
>> file2gframes\File2GFramesServer.java:35: warning: no @throws for
>> java.io.IOException
>>
>>   [javadoc]     public File2GFramesServer(MainServer mainserver,
>> java.net.Socket socket)
>>
>>   [javadoc]            ^
>>
>>
>>
>> BUILD SUCCESSFUL
>>
>> Total time: 1 second
>>
>>
>>
>>
>> ============================================================
>> ====================
>> Build SUMMARY
>>
>> Could not open bin\Release for reading.
>> Do you have permission to read it's contents?
>>
>>
>> time: 0:08
>> ============================================================
>> ====================
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150214/a36de434/attachment-0001.html>

From norvin.thomas at student.fh-kiel.de  Mon Feb 16 10:01:00 2015
From: norvin.thomas at student.fh-kiel.de (norvin.thomas at student.fh-kiel.de)
Date: Mon, 16 Feb 2015 16:01:00 +0100 (Mitteleuropäische Zeit   )
Subject: [Olympus developers 518]: Memory requirement for Olympus
Message-ID: <.149.222.51.146.1424098860.squirrel@student.fh-kiel.de>

Hello


Could you please mention that, how much space(memory) is required for
downloading the Olympus system(svn/Olympus).

                     Thanks in advance




Kind Regards
Norvin Thomas



From Alex.Rudnicky at cs.cmu.edu  Mon Feb 16 10:29:45 2015
From: Alex.Rudnicky at cs.cmu.edu (Alex Rudnicky)
Date: Mon, 16 Feb 2015 10:29:45 -0500
Subject: [Olympus developers 519]: Re: Memory requirement for Olympus
In-Reply-To: <.149.222.51.146.1424098860.squirrel@student.fh-kiel.de>
References: <.149.222.51.146.1424098860.squirrel@student.fh-kiel.de>
Message-ID: <11B6FA6BC9879A42BE5A6227C05F3E1F039398F70381@EXCH-MB-1.srv.cs.cmu.edu>

The download is about ~638MB; when built it uses up ~805MB.

-----Original Message-----
From: Olympus-developers [mailto:olympus-developers-bounces at mailman.srv.cs.cmu.edu] On Behalf Of norvin.thomas at student.fh-kiel.de
Sent: Monday, February 16, 2015 10:01 AM
To: olympus-developers at cs.cmu.edu
Subject: [Olympus developers 518]: Memory requirement for Olympus

Hello


Could you please mention that, how much space(memory) is required for downloading the Olympus system(svn/Olympus).

                     Thanks in advance




Kind Regards
Norvin Thomas




From mmarge at gmail.com  Wed Feb 18 18:33:34 2015
From: mmarge at gmail.com (Matthew Marge)
Date: Wed, 18 Feb 2015 23:33:34 +0000
Subject: [Olympus developers 520]: Re: Could not open bin\Release
References: <CAOGWWfcKnDjF_7NzT-vTsWavjPK-+Xiqv2KDi8FGZN9jQN9-MA@mail.gmail.com>
 <CAB0jr2yuQ0muqWeTWD_jO2q2z52KOysx1VTudxUYPOQQqkoZng@mail.gmail.com>
Message-ID: <CAOGWWffhTJ3N7wpJ_AXwEiTQMo6hTUO4iUU8yYrwLeB45hyJiA@mail.gmail.com>

OAA has not been supported with RavenClaw in some time. You can locate its
usage by searching the code for the appropriate OAA flags and start from
there.

On Wed Feb 18 2015 at 6:08:55 PM Ugan Yasavur <uyasa001 at fiu.edu> wrote:

> Hello,
>
> Thanks for your reply. It worked.
>
> I am trying to use Ravenclaw with OAA. I will use OAA facilitator to
> communicate with RavenClaw. I think it had been done before in IPA project.
> Can you provide some guidance about it?
>
> Thank you.
>
> Best,
> Ugan
>
> On Sat, Feb 14, 2015 at 11:26 AM, Matthew Marge <mmarge at gmail.com> wrote:
>
>> This is a known issue. We will be applying the fix some time this week.
>> In the near term, please read below:
>>
>> The root of the problem is with the session_timeout flag in Apollo.cfg in
>> the project. Commenting out/removing the flag allows the project to
>> function.
>>
>>  If you want to have session_timeout enabled, you can edit the code below:
>>
>> I found the bug in SessionAgent.cpp. Upon entering "init_session" with an
>> active flag for "session_timeout" the program crashes on this line:
>>
>> SessionAgent.cpp: Line 130
>> Log(AGENTS_STREAM, "Session Agent Configuration: session_timeout=%s",
>> sSessionTimeOut);
>>
>> The fix:
>> Log(AGENTS_STREAM, "Session Agent Configuration: session_timeout=%s",
>> sSessionTimeOut.c_str());
>>
>> Thanks,
>> Matt
>>
>> On Sat, Feb 14, 2015 at 5:24 AM Ugan Yasavur <uyasa001 at fiu.edu> wrote:
>>
>>> Hello,
>>>
>>> I actually solved the problem above. I asked the question one day ago.
>>>
>>> I am in the stage of running an example system. I think only example
>>> system that is compatible with version 2.6 is Mandeleine. I could able to
>>> build the version in Trunk folder, but the version in Branches\2.6 does not
>>> build. It tells that there is a syntax error in perl script.
>>>
>>> So application starts, and everything is green (used
>>> SystemRunFlite.bat). As soon as I write "init_session" to "
>>> TTYRecognitionServer", Apollo stops working. I can restart Apollo but I
>>> don't know is it same thing for the whole system. I write some messages to
>>> TTYRecognitionServer, such as "hi", "I have fever" etc.. I can see that
>>> phoenix is parsing my inputs, NLG Server and MandeleineNLG does not
>>> generate any output. I am not sure if RavenClaw do anything. I do not hear
>>> any TTS voice..
>>>
>>> It would be great if I could only use Phoenix + RavenClaw or RavenClaw
>>> only. My goal is to create new system by using RavenClaw.
>>>
>>> Thanks for the help.
>>> Ugan
>>>
>>>
>>> On Thu, Feb 12, 2015 at 4:53 PM, Ugan Yasavur <uyasa001 at fiu.edu> wrote:
>>>
>>>> Hello,
>>>>
>>>> I am trying to run Olympus 2.6 in Windows 7. I installed all the
>>>> perquisite softwares with the correct version. However I am getting
>>>> following problem at the end of the build.
>>>>
>>>> Could not open bin\Release for reading.
>>>> Do you have permission to read it's contents?
>>>>
>>>>
>>>> I shared below my build log. When I go to bin directory there is not a
>>>> folder named Release. I think I am stuck in this point.  I actually want to
>>>> only use RavenClaw, or Phoenix Ravenclaw Rosetta, I don't need TTS and
>>>> Speech. I am just sharing my intention if there is an alternative way to
>>>> make it work. I read that it is not possible to use RavenClaw as a
>>>> standalone dialog manager for now.
>>>>
>>>> Thanks for the help.
>>>>
>>>> ===============
>>>>
>>>> OLYMPUS_ROOT... .
>>>> BUILD_TYPE... Build
>>>> CMAKE_PARAMS... -D KALLIOPE_USE_FLITE:BOOL=yes -D
>>>> KALLIOPE_USE_SAPI:BOOL=no
>>>> LOGIOS_ROOT... Tools\logios
>>>> BUILD_CONF... Release
>>>> BUILD_LOG... build.log
>>>> Windows
>>>> Searching for File::Spec Perl Module... Found
>>>> Searching for File::Copy Perl Module... Found
>>>> Searching for IPC::Open3 Perl Module... Found
>>>> Searching for IO::Handle Perl Module... Found
>>>> Searching for Getopt::Long Perl Module... Found
>>>> Searching for Win32 Perl Module... Found
>>>> Searching for Win32::API Perl Module... Found
>>>> Searching for Win32::TieRegistry Perl Module... Found
>>>> Creating bin\x86-nt directory for build output... Done
>>>> Searching for TortoiseSVN... Found
>>>> Checking if the project is using CMake... Yes
>>>> Searching for CMake 2.6 or higher... Searching for maximum valid Visual
>>>> Studio version... 12.0 Found. [32bit]
>>>> Searching for Sun Java JDK... Found
>>>> Searching for NetBeans Ant... Found 'C:\Program Files (x86)\NetBeans
>>>> 8.0.2\extide\ant\bin\ant.bat'
>>>>
>>>>
>>>> ---|>- Running command: "C:\Program Files\TortoiseSVN\bin\SubWCRev.exe"
>>>> "C:\Olympus" Build\SVN_Data_Template.h Build\SVN_Data.h -f
>>>> SubWCRev: 'C:\Olympus'
>>>>
>>>> Last committed at revision 4563
>>>>
>>>> Updated to revision 4563
>>>>
>>>> Unversioned items found
>>>>
>>>>
>>>>
>>>>
>>>> ---|>- Running command: "C:\Program Files (x86)\CMake\bin\cmake.exe" -G
>>>> "Visual Studio 12" -D KALLIOPE_USE_FLITE:BOOL=yes -D
>>>> KALLIOPE_USE_SAPI:BOOL=no ../..
>>>>
>>>> ---|>- Running command: "C:/Program Files (x86)/MSBuild/12.0/bin/
>>>> MSBuild.exe" "Olympus.sln" /m:4 /p:Configuration=Release
>>>> /p:Platform=Win32
>>>> Microsoft (R) Build Engine version 12.0.31101.0
>>>>
>>>> [Microsoft .NET Framework, version 4.0.30319.18408]
>>>>
>>>> Copyright (C) Microsoft Corporation. All rights reserved.
>>>>
>>>>
>>>>
>>>> Build started 2/12/2015 4:30:39 PM.
>>>>
>>>>      1>Project "C:\Olympus\build\cmake\Olympus.sln" on node 1 (default
>>>> targets).
>>>>
>>>>      1>ValidateSolutionConfiguration:
>>>>
>>>>          Building solution configuration "Release|Win32".
>>>>
>>>>      1>Done Building Project "C:\Olympus\build\cmake\Olympus.sln"
>>>> (default targets).
>>>>
>>>>
>>>>
>>>> Build succeeded.
>>>>
>>>>     0 Warning(s)
>>>>
>>>>     0 Error(s)
>>>>
>>>>
>>>>
>>>> Time Elapsed 00:00:00.45
>>>>
>>>> Copying compiled executables and libraries from bin\Release to
>>>> bin\x86-nt.... Could not open bin\Release for reading.
>>>> Do you have permission to read it's contents?
>>>>
>>>> ------------------------------------------------------------
>>>> --------------------------------------------
>>>> Build an ant script using C:\Program Files (x86)\NetBeans
>>>> 8.0.2\extide\ant\bin\ant.bat
>>>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>>>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\JavaTTY\build.xml
>>>> default
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/3:javac
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/3:depend
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/3:junit
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/1:nbjpdastart
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/3:debug
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/1:java
>>>>
>>>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>>>
>>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\
>>>> DecoderInterpreter.java:30: warning: no @param for jconsole
>>>>
>>>>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
>>>> jconsoleWrite, DrawingPad pad) {
>>>>
>>>>   [javadoc]          ^
>>>>
>>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\
>>>> DecoderInterpreter.java:30: warning: no @param for jconsoleWrite
>>>>
>>>>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
>>>> jconsoleWrite, DrawingPad pad) {
>>>>
>>>>   [javadoc]          ^
>>>>
>>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\
>>>> DecoderInterpreter.java:30: warning: no @param for pad
>>>>
>>>>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
>>>> jconsoleWrite, DrawingPad pad) {
>>>>
>>>>   [javadoc]          ^
>>>>
>>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\
>>>> JavaTTYServer.java:23: warning: no @param for mainserver
>>>>
>>>>   [javadoc]     public JavaTTYServer(MainServer mainserver,
>>>> java.net.Socket socket) throws IOException {
>>>>
>>>>   [javadoc]            ^
>>>>
>>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\
>>>> JavaTTYServer.java:23: warning: no @param for socket
>>>>
>>>>   [javadoc]     public JavaTTYServer(MainServer mainserver,
>>>> java.net.Socket socket) throws IOException {
>>>>
>>>>   [javadoc]            ^
>>>>
>>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\
>>>> JavaTTYServer.java:23: warning: no @throws for java.io.IOException
>>>>
>>>>   [javadoc]     public JavaTTYServer(MainServer mainserver,
>>>> java.net.Socket socket) throws IOException {
>>>>
>>>>   [javadoc]            ^
>>>>
>>>>
>>>>
>>>> BUILD SUCCESSFUL
>>>>
>>>> Total time: 1 second
>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> --------------------------------------------
>>>> Build an ant script using C:\Program Files (x86)\NetBeans
>>>> 8.0.2\extide\ant\bin\ant.bat
>>>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>>>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Libraries\libOlympusUtility\
>>>> javaLibOlympusUtility\build.xml default
>>>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>>>
>>>>
>>>>
>>>> BUILD SUCCESSFUL
>>>>
>>>> Total time: 1 second
>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> --------------------------------------------
>>>> Build an ant script using C:\Program Files (x86)\NetBeans
>>>> 8.0.2\extide\ant\bin\ant.bat
>>>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>>>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\MultiDecoder\
>>>> AMSwitcher\build.xml default
>>>>      [echo] To run this application from the command line without Ant,
>>>> try:
>>>>
>>>>      [echo] java -cp "C:\Olympus\Libraries\Galaxy\c
>>>> ontrib\MITRE\bindings\java\lib\galaxy.jar;C:\Olympus\Agents\
>>>> MultiDecoder\AMSwitcher\dist\AMSwitcher.jar"
>>>> edu.cmu.olympus.amswitcher.AMSwitcher
>>>>
>>>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>>>
>>>>   [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\
>>>> olympus\amswitcher\AMSwitcher.java:163: warning: no description for
>>>> @param
>>>>
>>>>   [javadoc]      * @param name
>>>>
>>>>   [javadoc]        ^
>>>>
>>>>   [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\
>>>> olympus\amswitcher\AMSwitcher.java:53: warning: no @param for
>>>> switcherHook
>>>>
>>>>   [javadoc]     public AMSwitcher(AMSwitcherHook switcherHook) {
>>>>
>>>>   [javadoc]            ^
>>>>
>>>>   [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\
>>>> olympus\amswitcher\AMSwitcherHook.java:15: warning: no @param for
>>>> acousticModel
>>>>
>>>>   [javadoc]     public void switchTo(String acousticModel);
>>>>
>>>>   [javadoc]                 ^
>>>>
>>>>
>>>>
>>>> BUILD SUCCESSFUL
>>>>
>>>> Total time: 1 second
>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> --------------------------------------------
>>>> Build an ant script using C:\Program Files (x86)\NetBeans
>>>> 8.0.2\extide\ant\bin\ant.bat
>>>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>>>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile
>>>> Agents\File2GFrames\build.xml default
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/3:javac
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/3:depend
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/3:junit
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/1:nbjpdastart
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/3:debug
>>>>
>>>> Trying to override old definition of task http://www.netbeans.org/ns/
>>>> j2se-project/1:java
>>>>
>>>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>>>
>>>>   [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\
>>>> file2gframes\File2GFramesServer.java:35: warning: no @param for
>>>> mainserver
>>>>
>>>>   [javadoc]     public File2GFramesServer(MainServer mainserver,
>>>> java.net.Socket socket)
>>>>
>>>>   [javadoc]            ^
>>>>
>>>>   [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\
>>>> file2gframes\File2GFramesServer.java:35: warning: no @param for socket
>>>>
>>>>   [javadoc]     public File2GFramesServer(MainServer mainserver,
>>>> java.net.Socket socket)
>>>>
>>>>   [javadoc]            ^
>>>>
>>>>   [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\
>>>> file2gframes\File2GFramesServer.java:35: warning: no @throws for
>>>> java.io.IOException
>>>>
>>>>   [javadoc]     public File2GFramesServer(MainServer mainserver,
>>>> java.net.Socket socket)
>>>>
>>>>   [javadoc]            ^
>>>>
>>>>
>>>>
>>>> BUILD SUCCESSFUL
>>>>
>>>> Total time: 1 second
>>>>
>>>>
>>>>
>>>>
>>>> ============================================================
>>>> ====================
>>>> Build SUMMARY
>>>>
>>>> Could not open bin\Release for reading.
>>>> Do you have permission to read it's contents?
>>>>
>>>>
>>>> time: 0:08
>>>> ============================================================
>>>> ====================
>>>>
>>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150218/257dc734/attachment-0001.html>

From uyasa001 at fiu.edu  Wed Feb 18 18:08:55 2015
From: uyasa001 at fiu.edu (Ugan Yasavur)
Date: Wed, 18 Feb 2015 18:08:55 -0500
Subject: [Olympus developers 521]: Re: Could not open bin\Release
In-Reply-To: <CAOGWWfcKnDjF_7NzT-vTsWavjPK-+Xiqv2KDi8FGZN9jQN9-MA@mail.gmail.com>
References: <CAOGWWfcKnDjF_7NzT-vTsWavjPK-+Xiqv2KDi8FGZN9jQN9-MA@mail.gmail.com>
Message-ID: <CAB0jr2yuQ0muqWeTWD_jO2q2z52KOysx1VTudxUYPOQQqkoZng@mail.gmail.com>

Hello,

Thanks for your reply. It worked.

I am trying to use Ravenclaw with OAA. I will use OAA facilitator to
communicate with RavenClaw. I think it had been done before in IPA project.
Can you provide some guidance about it?

Thank you.

Best,
Ugan

On Sat, Feb 14, 2015 at 11:26 AM, Matthew Marge <mmarge at gmail.com> wrote:

> This is a known issue. We will be applying the fix some time this week. In
> the near term, please read below:
>
> The root of the problem is with the session_timeout flag in Apollo.cfg in
> the project. Commenting out/removing the flag allows the project to
> function.
>
>  If you want to have session_timeout enabled, you can edit the code below:
>
> I found the bug in SessionAgent.cpp. Upon entering "init_session" with an
> active flag for "session_timeout" the program crashes on this line:
>
> SessionAgent.cpp: Line 130
> Log(AGENTS_STREAM, "Session Agent Configuration: session_timeout=%s",
> sSessionTimeOut);
>
> The fix:
> Log(AGENTS_STREAM, "Session Agent Configuration: session_timeout=%s",
> sSessionTimeOut.c_str());
>
> Thanks,
> Matt
>
> On Sat, Feb 14, 2015 at 5:24 AM Ugan Yasavur <uyasa001 at fiu.edu> wrote:
>
>> Hello,
>>
>> I actually solved the problem above. I asked the question one day ago.
>>
>> I am in the stage of running an example system. I think only example
>> system that is compatible with version 2.6 is Mandeleine. I could able to
>> build the version in Trunk folder, but the version in Branches\2.6 does not
>> build. It tells that there is a syntax error in perl script.
>>
>> So application starts, and everything is green (used SystemRunFlite.bat).
>> As soon as I write "init_session" to "TTYRecognitionServer", Apollo
>> stops working. I can restart Apollo but I don't know is it same thing for
>> the whole system. I write some messages to TTYRecognitionServer, such as
>> "hi", "I have fever" etc.. I can see that phoenix is parsing my inputs, NLG
>> Server and MandeleineNLG does not generate any output. I am not sure if
>> RavenClaw do anything. I do not hear any TTS voice..
>>
>> It would be great if I could only use Phoenix + RavenClaw or RavenClaw
>> only. My goal is to create new system by using RavenClaw.
>>
>> Thanks for the help.
>> Ugan
>>
>>
>> On Thu, Feb 12, 2015 at 4:53 PM, Ugan Yasavur <uyasa001 at fiu.edu> wrote:
>>
>>> Hello,
>>>
>>> I am trying to run Olympus 2.6 in Windows 7. I installed all the
>>> perquisite softwares with the correct version. However I am getting
>>> following problem at the end of the build.
>>>
>>> Could not open bin\Release for reading.
>>> Do you have permission to read it's contents?
>>>
>>>
>>> I shared below my build log. When I go to bin directory there is not a
>>> folder named Release. I think I am stuck in this point.  I actually want to
>>> only use RavenClaw, or Phoenix Ravenclaw Rosetta, I don't need TTS and
>>> Speech. I am just sharing my intention if there is an alternative way to
>>> make it work. I read that it is not possible to use RavenClaw as a
>>> standalone dialog manager for now.
>>>
>>> Thanks for the help.
>>>
>>> ===============
>>>
>>> OLYMPUS_ROOT... .
>>> BUILD_TYPE... Build
>>> CMAKE_PARAMS... -D KALLIOPE_USE_FLITE:BOOL=yes -D
>>> KALLIOPE_USE_SAPI:BOOL=no
>>> LOGIOS_ROOT... Tools\logios
>>> BUILD_CONF... Release
>>> BUILD_LOG... build.log
>>> Windows
>>> Searching for File::Spec Perl Module... Found
>>> Searching for File::Copy Perl Module... Found
>>> Searching for IPC::Open3 Perl Module... Found
>>> Searching for IO::Handle Perl Module... Found
>>> Searching for Getopt::Long Perl Module... Found
>>> Searching for Win32 Perl Module... Found
>>> Searching for Win32::API Perl Module... Found
>>> Searching for Win32::TieRegistry Perl Module... Found
>>> Creating bin\x86-nt directory for build output... Done
>>> Searching for TortoiseSVN... Found
>>> Checking if the project is using CMake... Yes
>>> Searching for CMake 2.6 or higher... Searching for maximum valid Visual
>>> Studio version... 12.0 Found. [32bit]
>>> Searching for Sun Java JDK... Found
>>> Searching for NetBeans Ant... Found 'C:\Program Files (x86)\NetBeans
>>> 8.0.2\extide\ant\bin\ant.bat'
>>>
>>>
>>> ---|>- Running command: "C:\Program Files\TortoiseSVN\bin\SubWCRev.exe"
>>> "C:\Olympus" Build\SVN_Data_Template.h Build\SVN_Data.h -f
>>> SubWCRev: 'C:\Olympus'
>>>
>>> Last committed at revision 4563
>>>
>>> Updated to revision 4563
>>>
>>> Unversioned items found
>>>
>>>
>>>
>>>
>>> ---|>- Running command: "C:\Program Files (x86)\CMake\bin\cmake.exe" -G
>>> "Visual Studio 12" -D KALLIOPE_USE_FLITE:BOOL=yes -D
>>> KALLIOPE_USE_SAPI:BOOL=no ../..
>>>
>>> ---|>- Running command: "C:/Program Files (x86)/MSBuild/12.0/bin/MSBuild.exe"
>>> "Olympus.sln" /m:4 /p:Configuration=Release /p:Platform=Win32
>>> Microsoft (R) Build Engine version 12.0.31101.0
>>>
>>> [Microsoft .NET Framework, version 4.0.30319.18408]
>>>
>>> Copyright (C) Microsoft Corporation. All rights reserved.
>>>
>>>
>>>
>>> Build started 2/12/2015 4:30:39 PM.
>>>
>>>      1>Project "C:\Olympus\build\cmake\Olympus.sln" on node 1 (default
>>> targets).
>>>
>>>      1>ValidateSolutionConfiguration:
>>>
>>>          Building solution configuration "Release|Win32".
>>>
>>>      1>Done Building Project "C:\Olympus\build\cmake\Olympus.sln"
>>> (default targets).
>>>
>>>
>>>
>>> Build succeeded.
>>>
>>>     0 Warning(s)
>>>
>>>     0 Error(s)
>>>
>>>
>>>
>>> Time Elapsed 00:00:00.45
>>>
>>> Copying compiled executables and libraries from bin\Release to
>>> bin\x86-nt.... Could not open bin\Release for reading.
>>> Do you have permission to read it's contents?
>>>
>>> ------------------------------------------------------------
>>> --------------------------------------------
>>> Build an ant script using C:\Program Files (x86)\NetBeans
>>> 8.0.2\extide\ant\bin\ant.bat
>>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\JavaTTY\build.xml
>>> default
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/3:javac
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/3:depend
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/3:junit
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/1:nbjpdastart
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/3:debug
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/1:java
>>>
>>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>>
>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
>>> warning: no @param for jconsole
>>>
>>>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
>>> jconsoleWrite, DrawingPad pad) {
>>>
>>>   [javadoc]          ^
>>>
>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
>>> warning: no @param for jconsoleWrite
>>>
>>>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
>>> jconsoleWrite, DrawingPad pad) {
>>>
>>>   [javadoc]          ^
>>>
>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\DecoderInterpreter.java:30:
>>> warning: no @param for pad
>>>
>>>   [javadoc]   public DecoderInterpreter(JConsole jconsole, JConsole
>>> jconsoleWrite, DrawingPad pad) {
>>>
>>>   [javadoc]          ^
>>>
>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
>>> warning: no @param for mainserver
>>>
>>>   [javadoc]     public JavaTTYServer(MainServer mainserver,
>>> java.net.Socket socket) throws IOException {
>>>
>>>   [javadoc]            ^
>>>
>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
>>> warning: no @param for socket
>>>
>>>   [javadoc]     public JavaTTYServer(MainServer mainserver,
>>> java.net.Socket socket) throws IOException {
>>>
>>>   [javadoc]            ^
>>>
>>>   [javadoc] C:\Olympus\Agents\JavaTTY\src\edu\cmu\ravenclaw\javatty\JavaTTYServer.java:23:
>>> warning: no @throws for java.io.IOException
>>>
>>>   [javadoc]     public JavaTTYServer(MainServer mainserver,
>>> java.net.Socket socket) throws IOException {
>>>
>>>   [javadoc]            ^
>>>
>>>
>>>
>>> BUILD SUCCESSFUL
>>>
>>> Total time: 1 second
>>>
>>>
>>> ------------------------------------------------------------
>>> --------------------------------------------
>>> Build an ant script using C:\Program Files (x86)\NetBeans
>>> 8.0.2\extide\ant\bin\ant.bat
>>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Libraries\libOlympusUtility\
>>> javaLibOlympusUtility\build.xml default
>>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>>
>>>
>>>
>>> BUILD SUCCESSFUL
>>>
>>> Total time: 1 second
>>>
>>>
>>> ------------------------------------------------------------
>>> --------------------------------------------
>>> Build an ant script using C:\Program Files (x86)\NetBeans
>>> 8.0.2\extide\ant\bin\ant.bat
>>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile Agents\MultiDecoder\
>>> AMSwitcher\build.xml default
>>>      [echo] To run this application from the command line without Ant,
>>> try:
>>>
>>>      [echo] java -cp "C:\Olympus\Libraries\Galaxy\c
>>> ontrib\MITRE\bindings\java\lib\galaxy.jar;C:\Olympus\Agents\
>>> MultiDecoder\AMSwitcher\dist\AMSwitcher.jar" edu.cmu.olympus.amswitcher.
>>> AMSwitcher
>>>
>>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>>
>>>   [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\
>>> olympus\amswitcher\AMSwitcher.java:163: warning: no description for
>>> @param
>>>
>>>   [javadoc]      * @param name
>>>
>>>   [javadoc]        ^
>>>
>>>   [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\
>>> olympus\amswitcher\AMSwitcher.java:53: warning: no @param for
>>> switcherHook
>>>
>>>   [javadoc]     public AMSwitcher(AMSwitcherHook switcherHook) {
>>>
>>>   [javadoc]            ^
>>>
>>>   [javadoc] C:\Olympus\Agents\MultiDecoder\AMSwitcher\src\edu\cmu\
>>> olympus\amswitcher\AMSwitcherHook.java:15: warning: no @param for
>>> acousticModel
>>>
>>>   [javadoc]     public void switchTo(String acousticModel);
>>>
>>>   [javadoc]                 ^
>>>
>>>
>>>
>>> BUILD SUCCESSFUL
>>>
>>> Total time: 1 second
>>>
>>>
>>> ------------------------------------------------------------
>>> --------------------------------------------
>>> Build an ant script using C:\Program Files (x86)\NetBeans
>>> 8.0.2\extide\ant\bin\ant.bat
>>> ---|>- Running command: "C:\Program Files (x86)\NetBeans
>>> 8.0.2\extide\ant\bin\ant.bat" -quiet -buildfile
>>> Agents\File2GFrames\build.xml default
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/3:javac
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/3:depend
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/3:junit
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/1:nbjpdastart
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/3:debug
>>>
>>> Trying to override old definition of task http://www.netbeans.org/ns/j2s
>>> e-project/1:java
>>>
>>>   [javadoc] Warning: Leaving out empty argument '-windowtitle'
>>>
>>>   [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\
>>> file2gframes\File2GFramesServer.java:35: warning: no @param for
>>> mainserver
>>>
>>>   [javadoc]     public File2GFramesServer(MainServer mainserver,
>>> java.net.Socket socket)
>>>
>>>   [javadoc]            ^
>>>
>>>   [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\
>>> file2gframes\File2GFramesServer.java:35: warning: no @param for socket
>>>
>>>   [javadoc]     public File2GFramesServer(MainServer mainserver,
>>> java.net.Socket socket)
>>>
>>>   [javadoc]            ^
>>>
>>>   [javadoc] C:\Olympus\Agents\File2GFrames\src\edu\cmu\olympus\
>>> file2gframes\File2GFramesServer.java:35: warning: no @throws for
>>> java.io.IOException
>>>
>>>   [javadoc]     public File2GFramesServer(MainServer mainserver,
>>> java.net.Socket socket)
>>>
>>>   [javadoc]            ^
>>>
>>>
>>>
>>> BUILD SUCCESSFUL
>>>
>>> Total time: 1 second
>>>
>>>
>>>
>>>
>>> ============================================================
>>> ====================
>>> Build SUMMARY
>>>
>>> Could not open bin\Release for reading.
>>> Do you have permission to read it's contents?
>>>
>>>
>>> time: 0:08
>>> ============================================================
>>> ====================
>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150218/cc646f2b/attachment-0001.html>

From norvin.thomas at student.fh-kiel.de  Mon Feb 23 10:31:43 2015
From: norvin.thomas at student.fh-kiel.de (norvin.thomas at student.fh-kiel.de)
Date: Mon, 23 Feb 2015 15:31:43 -0000
Subject: [Olympus developers 538]: Building Olympus
Message-ID: <.149.222.51.146.1424705498.squirrel@student.fh-kiel.de>


Hello

While running OlympusBuild.pl I have getting errors, so I run it via
visual studio directly.Certain components are installed in the Release
folder(Olympus-bin-Release). I have attached the sreenshot.Could you
please reply me whether I can proceed it or not.
                             Thanks in advance




Kind regards
Norvin Thomas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Olympus_bin_release.PNG
Type: image/x-png
Size: 75677 bytes
Desc: not available
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150223/419f9264/attachment-0001.bin>

From BanditaSarma at my.unt.edu  Thu Feb 19 18:50:39 2015
From: BanditaSarma at my.unt.edu (Sarma, Bandita)
Date: Thu, 19 Feb 2015 23:50:39 -0000
Subject: [Olympus developers 540]: Issues with Olympus building and
	Madeleine example
Message-ID: <1424389829879.16578@my.unt.edu>

Hi,


I have the following issues with using the Olympus framework. Would you please take a look at them.


  *   ?Built Olympus but got an error saying: Problem building Visual Studio Solution: Olympus.sln. Problem building Olympus Agents using CMake. As per your suggestion, I tried deleting the contents of Build/cmake/ and rebuilding using OlympusRebuild.pl. That did not resolve the error.
  *   Since, the log file did say 'BUILD SUCCESSFUL' I went ahead and tried the Madeleine example provided. The Madeleine SAPI window which pops up is unable to locate the KalliopeSAPI, AudioServer, Helios and PocketSphinxEngine in the Olympus2.6\bin\release\ directory. It seems those files were never created during the build.

Would you please let me know how to fix these errors? I have attached the log file from building Olympus.

Thanks,
Bandita




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150219/7dc20ea7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: build.log
Type: application/octet-stream
Size: 171236 bytes
Desc: build.log
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20150219/7dc20ea7/attachment-0001.obj>