[Olympus developers 465]: Re: documentation on Skyper?

[Nitin Dhawan]

Thanks. This looks like a good approach. 

 

Any ideas where to make the changes in Skyper to get it to write to and read
from the network socket ?

 

Regards

 

From: Aasish Pappu [mailto:aasishp at gmail.com] 
Sent: Wednesday, February 19, 2014 6:44 PM
To: Nitin Dhawan
Cc: olympus-developers
Subject: Re: [Olympus developers 460]: Re: documentation on Skyper?

 

That's one way to look at the problem. I would think of something more
scalable rather than device ids (meaning multiple physical devices). You
could try writing the audio data to a network socket and forward it to the
audio server. You will have to convert the audio server to accept network
stream as opposed to reading frm device. There is an example of such
instance in this branch. 

 

The audioserver reads the data from a socket and there's an audio client
that feeds this data. 

 

 

http://trac.speech.cs.cmu.edu/repos/olympus/branches/networkoly/

 

 

On Wed, Feb 19, 2014 at 8:08 AM, Nitin Dhawan
<nitin at imarketingadvantage.com> wrote:

>From what we understand now , I believe we have to add Skype's device id  to
the Audio Server configuration. And we will need more than one audio server
to take care of 

a.       Skype

b.      Telephony

c.       Local Microphone Input

 

Are we on the right track?

 

From: Nitin Dhawan [mailto:nitin at imarketingadvantage.com] 
Sent: Wednesday, February 19, 2014 12:18 AM
To: olympus-developers (olympus-developers at cs.cmu.edu)
Subject: RE: documentation on Skyper?

 

I am able to start Skyper at the start and see it in process monitors. But
it does not seem to start real server for some reason.

 

This is what I have done so far.

a.       I add [Skyper] to Servers  RoomLine-hub.pgm

b.      To startlist_sapi.config, I add

PROCESS: "$OLYMPUS_BIN\skyper"

PROCESS_MONITOR_ARGS: --start

PROCESS_TITLE: SKYPER

 

When I start the skyper.exe independently -  it seems to be connecting with
skype just fine. But when I call in from another skype account into this, it
does not start a session, and it crashes.  It is not connected to the hub
instance also like this.

 

From: Nitin Dhawan [mailto:nitin at imarketingadvantage.com] 
Sent: Tuesday, February 18, 2014 7:38 PM
To: olympus-developers (olympus-developers at cs.cmu.edu)
Subject: documentation on Skyper?

 

We found skyper within the main code. But we are not able to configure it
properly. Can someone suggest the right way to configure or if there is any
documentation.

 

Thanks in advance.





 

-- 
Aasish Pappu

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/olympus-developers/attachments/20140219/1dd79240/attachment-0001.html>