GPU11

[Predrag Punosevac]

The HDD died. Luckily, I was smart enough to leave the second unused
storage drive in that computing node.

root at gpu11$ lsblk
NAME              MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda                 8:0    0   1.8T  0 disk
└─sda1              8:1    0   1.8T  0 part
sdb                 8:16   0   1.8T  0 disk
└─sdb1              8:17   0   1.8T  0 part /home/scratch2
nvme0n1           259:0    0 238.5G  0 disk
├─nvme0n1p1       259:1    0     1G  0 part /boot
└─nvme0n1p2       259:2    0 237.5G  0 part
  ├─sl_gpu11-root 253:0    0    50G  0 lvm  /
  ├─sl_gpu11-swap 253:1    0     4G  0 lvm  [SWAP]
  └─sl_gpu11-home 253:2    0 183.5G  0 lvm  /home


I just created

/home/scratch2

on /dev/sdb1

After the scheduled power outage, you should pull the dead drive out. I
don't recall the drive bay label (not a file server so not very important),
but since the server is going to be off, make sure you leave the NVMe drive
and a 3.5" HDD with the following serial number.



=== GOOD DRIVE INFORMATION SECTION ===
Model Family:     Seagate Enterprise Capacity 3.5 HDD
Device Model:     ST2000NM0055-1V4104
Serial Number:    ZC22SY3F

Cheers,
Predrag

On Thu, May 4, 2023 at 1:48 PM Piotr Bartosiewicz <pbartosi at andrew.cmu.edu>
wrote:

> Problem with the scratch directory.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.srv.cs.cmu.edu/pipermail/autonlab-users/attachments/20230504/0e47a887/attachment.html>