gaia.int.autonlab.org security run output

[punosevac72 at gmail.com]

gaia.int.autonlab.org kernel log messages:
> pci127: <base peripheral> at device 13.1 (no driver attached)
> pci127: <base peripheral> at device 13.2 (no driver attached)
> pci127: <base peripheral> at device 14.0 (no driver attached)
> pci127: <dasp> at device 14.1 (no driver attached)
> pci127: <base peripheral> at device 15.0 (no driver attached)
> pci127: <base peripheral> at device 15.1 (no driver attached)
> pci127: <base peripheral> at device 15.2 (no driver attached)
> pci127: <base peripheral> at device 15.3 (no driver attached)
> pci127: <base peripheral> at device 15.4 (no driver attached)
> pci127: <base peripheral> at device 15.5 (no driver attached)
> pci127: <base peripheral> at device 16.0 (no driver attached)
> pci127: <base peripheral> at device 16.1 (no driver attached)
> pci127: <base peripheral> at device 16.2 (no driver attached)
> pci127: <base peripheral> at device 16.3 (no driver attached)
> pci127: <base peripheral> at device 16.4 (no driver attached)
> pci127: <base peripheral> at device 16.5 (no driver attached)
> pci127: <base peripheral> at device 16.6 (no driver attached)
> pci127: <base peripheral> at device 16.7 (no driver attached)
> pci127: <base peripheral> at device 19.0 (no driver attached)
> pci127: <dasp> at device 19.1 (no driver attached)
> pci127: <base peripheral> at device 19.4 (no driver attached)
> pci127: <dasp> at device 19.5 (no driver attached)
> pci127: <base peripheral> at device 22.0 (no driver attached)
> pci127: <base peripheral> at device 22.1 (no driver attached)
> pci127: <base peripheral> at device 22.2 (no driver attached)
> pcib9: <ACPI Host-PCI bridge> on acpi0
> pci128: <ACPI PCI bus> on pcib9
> pcib10: <ACPI PCI-PCI bridge> irq 50 at device 1.0 on pci128
> pci129: <ACPI PCI bus> on pcib10
> pcib11: <ACPI PCI-PCI bridge> irq 56 at device 2.0 on pci128
> pci130: <ACPI PCI bus> on pcib11
> pcib12: <ACPI PCI-PCI bridge> irq 56 at device 2.2 on pci128
> pci131: <ACPI PCI bus> on pcib12
> pcib13: <ACPI PCI-PCI bridge> irq 64 at device 3.0 on pci128
> pci132: <ACPI PCI bus> on pcib13
> pci128: <base peripheral> at device 4.0 (no driver attached)
> pci128: <base peripheral> at device 4.1 (no driver attached)
> pci128: <base peripheral> at device 4.2 (no driver attached)
> pci128: <base peripheral> at device 4.3 (no driver attached)
> pci128: <base peripheral> at device 4.4 (no driver attached)
> pci128: <base peripheral> at device 4.5 (no driver attached)
> pci128: <base peripheral> at device 4.6 (no driver attached)
> pci128: <base peripheral> at device 4.7 (no driver attached)
> pci128: <base peripheral> at device 5.0 (no driver attached)
> pci128: <base peripheral> at device 5.2 (no driver attached)
> pcib14: <ACPI Host-PCI bridge> on acpi0
> pci255: <ACPI PCI bus> on pcib14
> pci255: <base peripheral> at device 8.0 (no driver attached)
> pci255: <base peripheral> at device 9.0 (no driver attached)
> pci255: <base peripheral> at device 10.0 (no driver attached)
> pci255: <base peripheral> at device 10.1 (no driver attached)
> pci255: <base peripheral> at device 10.2 (no driver attached)
> pci255: <base peripheral> at device 10.3 (no driver attached)
> pci255: <base peripheral> at device 11.0 (no driver attached)
> pci255: <base peripheral> at device 11.3 (no driver attached)
> pci255: <base peripheral> at device 12.0 (no driver attached)
> pci255: <base peripheral> at device 12.1 (no driver attached)
> pci255: <base peripheral> at device 12.2 (no driver attached)
> pci255: <base peripheral> at device 13.0 (no driver attached)
> pci255: <base peripheral> at device 13.1 (no driver attached)
> pci255: <base peripheral> at device 13.2 (no driver attached)
> pci255: <base peripheral> at device 14.0 (no driver attached)
> pci255: <dasp> at device 14.1 (no driver attached)
> pci255: <base peripheral> at device 15.0 (no driver attached)
> pci255: <base peripheral> at device 15.1 (no driver attached)
> pci255: <base peripheral> at device 15.2 (no driver attached)
> pci255: <base peripheral> at device 15.3 (no driver attached)
> pci255: <base peripheral> at device 15.4 (no driver attached)
> pci255: <base peripheral> at device 15.5 (no driver attached)
> pci255: <base peripheral> at device 16.0 (no driver attached)
> pci255: <base peripheral> at device 16.1 (no driver attached)
> pci255: <base peripheral> at device 16.2 (no driver attached)
> pci255: <base peripheral> at device 16.3 (no driver attached)
> pci255: <base peripheral> at device 16.4 (no driver attached)
> pci255: <base peripheral> at device 16.5 (no driver attached)
> pci255: <base peripheral> at device 16.6 (no driver attached)
> pci255: <base peripheral> at device 16.7 (no driver attached)
> pci255: <base peripheral> at device 19.0 (no driver attached)
> pci255: <dasp> at device 19.1 (no driver attached)
> pci255: <base peripheral> at device 19.4 (no driver attached)
> pci255: <dasp> at device 19.5 (no driver attached)
> pci255: <base peripheral> at device 22.0 (no driver attached)
> pci255: <base peripheral> at device 22.1 (no driver attached)
> pci255: <base peripheral> at device 22.2 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> ichwd0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> wbwd0: HEFRAS and EFER do not align: EFER 0x2e DevID 0xff DevRev 0xff CR26 0xff
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> coretemp2: <CPU On-Die Thermal Sensors> on cpu2
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> coretemp3: <CPU On-Die Thermal Sensors> on cpu3
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> coretemp4: <CPU On-Die Thermal Sensors> on cpu4
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> p4tcc4: <CPU Frequency Thermal Control> on cpu4
> coretemp5: <CPU On-Die Thermal Sensors> on cpu5
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> p4tcc5: <CPU Frequency Thermal Control> on cpu5
> coretemp6: <CPU On-Die Thermal Sensors> on cpu6
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> p4tcc6: <CPU Frequency Thermal Control> on cpu6
> coretemp7: <CPU On-Die Thermal Sensors> on cpu7
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> p4tcc7: <CPU Frequency Thermal Control> on cpu7
> coretemp8: <CPU On-Die Thermal Sensors> on cpu8
> est8: <Enhanced SpeedStep Frequency Control> on cpu8
> p4tcc8: <CPU Frequency Thermal Control> on cpu8
> coretemp9: <CPU On-Die Thermal Sensors> on cpu9
> est9: <Enhanced SpeedStep Frequency Control> on cpu9
> p4tcc9: <CPU Frequency Thermal Control> on cpu9
> coretemp10: <CPU On-Die Thermal Sensors> on cpu10
> est10: <Enhanced SpeedStep Frequency Control> on cpu10
> p4tcc10: <CPU Frequency Thermal Control> on cpu10
> coretemp11: <CPU On-Die Thermal Sensors> on cpu11
> est11: <Enhanced SpeedStep Frequency Control> on cpu11
> p4tcc11: <CPU Frequency Thermal Control> on cpu11
> coretemp12: <CPU On-Die Thermal Sensors> on cpu12
> est12: <Enhanced SpeedStep Frequency Control> on cpu12
> p4tcc12: <CPU Frequency Thermal Control> on cpu12
> coretemp13: <CPU On-Die Thermal Sensors> on cpu13
> est13: <Enhanced SpeedStep Frequency Control> on cpu13
> p4tcc13: <CPU Frequency Thermal Control> on cpu13
> coretemp14: <CPU On-Die Thermal Sensors> on cpu14
> est14: <Enhanced SpeedStep Frequency Control> on cpu14
> p4tcc14: <CPU Frequency Thermal Control> on cpu14
> coretemp15: <CPU On-Die Thermal Sensors> on cpu15
> est15: <Enhanced SpeedStep Frequency Control> on cpu15
> p4tcc15: <CPU Frequency Thermal Control> on cpu15
> coretemp16: <CPU On-Die Thermal Sensors> on cpu16
> est16: <Enhanced SpeedStep Frequency Control> on cpu16
> p4tcc16: <CPU Frequency Thermal Control> on cpu16
> coretemp17: <CPU On-Die Thermal Sensors> on cpu17
> est17: <Enhanced SpeedStep Frequency Control> on cpu17
> p4tcc17: <CPU Frequency Thermal Control> on cpu17
> coretemp18: <CPU On-Die Thermal Sensors> on cpu18
> est18: <Enhanced SpeedStep Frequency Control> on cpu18
> p4tcc18: <CPU Frequency Thermal Control> on cpu18
> coretemp19: <CPU On-Die Thermal Sensors> on cpu19
> est19: <Enhanced SpeedStep Frequency Control> on cpu19
> p4tcc19: <CPU Frequency Thermal Control> on cpu19
> coretemp20: <CPU On-Die Thermal Sensors> on cpu20
> est20: <Enhanced SpeedStep Frequency Control> on cpu20
> p4tcc20: <CPU Frequency Thermal Control> on cpu20
> coretemp21: <CPU On-Die Thermal Sensors> on cpu21
> est21: <Enhanced SpeedStep Frequency Control> on cpu21
> p4tcc21: <CPU Frequency Thermal Control> on cpu21
> coretemp22: <CPU On-Die Thermal Sensors> on cpu22
> est22: <Enhanced SpeedStep Frequency Control> on cpu22
> p4tcc22: <CPU Frequency Thermal Control> on cpu22
> coretemp23: <CPU On-Die Thermal Sensors> on cpu23
> est23: <Enhanced SpeedStep Frequency Control> on cpu23
> p4tcc23: <CPU Frequency Thermal Control> on cpu23
> Timecounters tick every 1.000 msec
> ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
> DUMMYNET 0xfffffe0009c73000 with IPv6 initialized (100409)
> load_dn_sched dn_sched RR loaded
> load_dn_sched dn_sched WF2Q+ loaded
> load_dn_sched dn_sched FIFO loaded
> load_dn_sched dn_sched PRIO loaded
> load_dn_sched dn_sched QFQ loaded
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 480Mbps High Speed USB v2.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> ada0 at ahcich2 bus 0 scbus3 target 0 lun 0
> ada0: <InnoLite SATADOM D150QV-L 120319> ATA-8 SATA 2.x device
> ada0: Serial Number 20130910AA0000000003
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 61057MB (125045424 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad8
> ses0 at mps0 bus 0 scbus0 target 16 lun 0
> ses0: <LSI SAS2X28 0e12> Fixed Enclosure Services SCSI-5 device 
> ses0: Serial Number 
> ses0: 600.000MB/s transfers
> ses0: Command Queueing enabled
> ses0: SCSI-3 ENC Device
> da0 at mps0 bus 0 scbus0 target 8 lun 0
> da0: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da0: Serial Number             Z1Y0759Z
> da0: 600.000MB/s transfers
> da0: Command Queueing enabled
> da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da1 at mps0 bus 0 scbus0 target 9 lun 0
> da1: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da1: Serial Number             Z1Y07594
> da1: 600.000MB/s transfers
> da1: Command Queueing enabled
> da1: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da2 at mps0 bus 0 scbus0 target 10 lun 0
> da2: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da2: Serial Number             Z1Z0ZYQ3
> da2: 600.000MB/s transfers
> da2: Command Queueing enabled
> da2: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da3 at mps0 bus 0 scbus0 target 11 lun 0
> da3: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da3: Serial Number             Z1Z0W9L4
> da3: 600.000MB/s transfers
> da3: Command Queueing enabled
> da3: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da4 at mps0 bus 0 scbus0 target 12 lun 0
> da4: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da4: Serial Number             Z1Y075WP
> da4: 600.000MB/s transfers
> da4: Command Queueing enabled
> da4: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da5 at mps0 bus 0 scbus0 target 13 lun 0
> da5: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da5: Serial Number             Z1Y075A2
> da5: 600.000MB/s transfers
> da5: Command Queueing enabled
> da5: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da6 at mps0 bus 0 scbus0 target 14 lun 0
> da6: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da6: Serial Number             Z1Y0B6L8
> da6: 600.000MB/s transfers
> da6: Command Queueing enabled
> da6: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da7 at mps0 bus 0 scbus0 target 15 lun 0
> da7: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da7: Serial Number             Z1Y075AX
> da7: 600.000MB/s transfers
> da7: Command Queueing enabled
> da7: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da8 at mps0 bus 0 scbus0 target 17 lun 0
> da8: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da8: Serial Number             Z1Y08CLV
> da8: 600.000MB/s transfers
> da8: Command Queueing enabled
> da8: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da9 at mps0 bus 0 scbus0 target 18 lun 0
> da9: <ATA ST3000NM0033-9ZM 0001> Fixed Direct Access SCSI-6 device 
> da9: Serial Number             Z1Y09N23
> da9: 600.000MB/s transfers
> da9: Command Queueing enabled
> da9: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #11 Launched!
> SMP: AP CPU #23 Launched!
> SMP: AP CPU #10 Launched!
> SMP: AP CPU #20 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #16 Launched!
> SMP: AP CPU #9 Launched!
> SMP: AP CPU #12 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #13 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #14 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #22 Launched!
> SMP: AP CPU #8 Launched!
> SMP: AP CPU #15 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #21 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #18 Launched!
> SMP: AP CPU #17 Launched!
> SMP: AP CPU #19 Launched!
> Swap zone entries reduced from 8127730 to 5418486.
> Timecounter "TSC" frequency 2100047332 Hz quality 1000
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus1 usbus0
> ugen0.2: <vendor 0x8087> at usbus0
> uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
> ugen1.2: <vendor 0x8087> at usbus1
> uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
> Root mount waiting for: usbus1 usbus0
> uhub2: 6 ports with 6 removable, self powered
> uhub3: 8 ports with 8 removable, self powered
> Root mount waiting for: usbus1 usbus0
> ugen0.3: <Winbond Electronics Corp> at usbus0
> ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
> ums0: 3 buttons and [Z] coordinates ID=0
> ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
> kbd0 at ukbd0
> ugen1.3: <Dell> at usbus1
> ukbd1: <EP1 Interrupt> on usbus1
> kbd2 at ukbd1
> Trying to mount root from ufs:/dev/ufs/FreeNASs1a [ro]...
> GEOM_RAID5: Module loaded, version 1.1.20130907.44 (rev 5c6d2a159411)
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> GEOM_ELI: Device da0p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da1p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da2p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da3p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da4p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da5p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da6p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da7p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da8p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da9p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> vboxdrv: fAsync=0 offMin=0x246 offMax=0x8688
> ugen1.3: <Dell> at usbus1 (disconnected)
> ukbd1: at uhub3, port 3, addr 3 (disconnected)
> pid 7734 (winbindd), uid 0: exited on signal 6 (core dumped)
> pid 7980 (winbindd), uid 0: exited on signal 6 (core dumped)
> CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2100.04-MHz K8-class CPU)
> SMP: AP CPU #11 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #21 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #17 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #19 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #20 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #10 Launched!
> SMP: AP CPU #14 Launched!
> Timecounter "TSC" frequency 2100041888 Hz quality 1000
> WARNING: /data was not properly dismounted
> vboxdrv: fAsync=0 offMin=0x25e offMax=0x81cb

-- End of security output --