neill-zfs.int.autonlab.org security run output

[punosevac72 at gmail.com]

neill-zfs.int.autonlab.org kernel log messages:
> Copyright (c) 1992-2013 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.2-RELEASE-p15 #0 r262572+5b7d179: Mon Nov 17 16:27:51 PST 2014
>     root at build3.ixsystems.com:/tank/home/jkh/build/921/FN/os-base/amd64/fusion/jkh/921/FN/FreeBSD/src/sys/FREENAS.amd64 amd64
> gcc version 4.2.1 20070831 patched [FreeBSD]
> CPU: Intel(R) Xeon(R) CPU E3-1220 v3 @ 3.10GHz (3092.91-MHz K8-class CPU)
>   Origin = "GenuineIntel"  Id = 0x306c3  Family = 0x6  Model = 0x3c  Stepping = 3
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>   AMD Features2=0x21<LAHF,ABM>
>   Standard Extended Features=0x2fbb<GSFSBASE,TSCADJ,SMEP,ENHMOVSB,INVPCID>
>   TSC: P-state invariant, performance statistics
> real memory  = 34376515584 (32784 MB)
> avail memory = 33131098112 (31596 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <SUPERM SMCI--MB>
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s)
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  2
>  cpu2 (AP): APIC ID:  4
>  cpu3 (AP): APIC ID:  6
> WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
> ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> cryptosoft0: <software crypto> on motherboard
> aesni0: <AES-CBC,AES-XTS> on motherboard
> padlock0: No ACE support.
> acpi0: <SUPERM SMCI--MB> on motherboard
> acpi0: Power Button (fixed)
> acpi0: reservation of 67, 1 (4) failed
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 550
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> Event timer "HPET4" frequency 14318180 Hz quality 440
> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <serial bus, USB> at device 20.0 (no driver attached)
> pci0: <simple comms> at device 22.0 (no driver attached)
> pci0: <simple comms> at device 22.1 (no driver attached)
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7713000-0xf77133ff irq 16 at device 26.0 on pci0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 16 at device 0.0 on pci2
> pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
> pci3: <ACPI PCI bus> on pcib3
> igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xd000-0xd01f mem 0xf7600000-0xf767ffff,0xf7680000-0xf7683fff irq 18 at device 0.0 on pci3
> igb0: Using MSIX interrupts with 5 vectors
> igb0: Ethernet address: 00:25:90:db:34:58
> igb0: Bound queue 0 to cpu 0
> igb0: Bound queue 1 to cpu 1
> igb0: Bound queue 2 to cpu 2
> igb0: Bound queue 3 to cpu 3
> pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
> pci4: <ACPI PCI bus> on pcib4
> igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xc000-0xc01f mem 0xf7500000-0xf757ffff,0xf7580000-0xf7583fff irq 19 at device 0.0 on pci4
> igb1: Using MSIX interrupts with 5 vectors
> igb1: Ethernet address: 00:25:90:db:34:59
> igb1: Bound queue 0 to cpu 0
> igb1: Bound queue 1 to cpu 1
> igb1: Bound queue 2 to cpu 2
> igb1: Bound queue 3 to cpu 3
> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci5: <ACPI PCI bus> on pcib5
> mps0: <LSI SAS2308> port 0xb000-0xb0ff mem 0xf7240000-0xf724ffff,0xf7200000-0xf723ffff irq 16 at device 0.0 on pci5
> mps0: Firmware: 17.00.01.00, Driver: 16.00.00.00-fbsd
> mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
> pci6: <ACPI PCI bus> on pcib6
> igb2: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xa000-0xa01f mem 0xf7400000-0xf747ffff,0xf7480000-0xf7483fff irq 18 at device 0.0 on pci6
> igb2: Using MSIX interrupts with 5 vectors
> igb2: Ethernet address: 00:25:90:db:34:5a
> igb2: Bound queue 0 to cpu 0
> igb2: Bound queue 1 to cpu 1
> igb2: Bound queue 2 to cpu 2
> igb2: Bound queue 3 to cpu 3
> pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
> pci7: <ACPI PCI bus> on pcib7
> igb3: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x9000-0x901f mem 0xf7300000-0xf737ffff,0xf7380000-0xf7383fff irq 19 at device 0.0 on pci7
> igb3: Using MSIX interrupts with 5 vectors
> igb3: Ethernet address: 00:25:90:db:34:5b
> igb3: Bound queue 0 to cpu 0
> igb3: Bound queue 1 to cpu 1
> igb3: Bound queue 2 to cpu 2
> igb3: Bound queue 3 to cpu 3
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7712000-0xf77123ff irq 23 at device 29.0 on pci0
> usbus1: EHCI version 1.0
> usbus1 on ehci1
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7711000-0xf77117ff irq 19 at device 31.2 on pci0
> ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich3: <AHCI channel> at channel 3 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pci0: <dasp> at device 31.6 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: CGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
> wbwd0: DevID 0xc3 DevRev 0x33, will not attach, please report this.
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> coretemp2: <CPU On-Die Thermal Sensors> on cpu2
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> coretemp3: <CPU On-Die Thermal Sensors> on cpu3
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> Timecounters tick every 1.000 msec
> ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
> DUMMYNET 0xfffffe0005e2f000 with IPv6 initialized (100409)
> load_dn_sched dn_sched RR loaded
> load_dn_sched dn_sched WF2Q+ loaded
> load_dn_sched dn_sched FIFO loaded
> load_dn_sched dn_sched PRIO loaded
> load_dn_sched dn_sched QFQ loaded
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 480Mbps High Speed USB v2.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
> ada0: <InnoLite SATADOM D150QV-L 120319> ATA-8 SATA 2.x device
> ada0: Serial Number 20130910AA0000000008
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 61057MB (125045424 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> da0 at mps0 bus 0 scbus0 target 0 lun 0
> da0: <ATA WDC WD20EFRX-68E 0A80> Fixed Direct Access SCSI-6 device 
> da0: Serial Number      WD-WMC4M1229871
> da0: 600.000MB/s transfers
> SMP: AP CPU #2 Launched!
> da0: Command Queueing enabled
> da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da0: quirks=0x8<4K>
> SMP: AP CPU #3 Launched!
> da1 at mps0 bus 0 scbus0 target 1 lun 0
> da1: <ATA WDC WD20EFRX-68E 0A80> Fixed Direct Access SCSI-6 device 
> da1: Serial Number      WD-WMC4M1253470
> SMP: AP CPU #1 Launched!
> da1: 600.000MB/s transfers
> da1: Command Queueing enabled
> da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da1: quirks=0x8<4K>
> da2 at mps0 bus 0 scbus0 target 2 lun 0
> da2: <ATA WDC WD20EFRX-68E 0A80> Fixed Direct Access SCSI-6 device 
> da2: Serial Number      WD-WMC4M1084709
> da2: 600.000MB/s transfers
> da2: Command Queueing enabled
> da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da2: quirks=0x8<4K>
> da3 at mps0 bus 0 scbus0 target 3 lun 0
> da3: <ATA WDC WD20EFRX-68E 0A80> Fixed Direct Access SCSI-6 device 
> da3: Serial Number      WD-WMC4M1285710
> da3: 600.000MB/s transfers
> da3: Command Queueing enabled
> da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da3: quirks=0x8<4K>
> da4 at mps0 bus 0 scbus0 target 4 lun 0
> da4: <ATA WDC WD20EFRX-68E 0A80> Fixed Direct Access SCSI-6 device 
> da4: Serial Number      WD-WMC4M1228095
> da4: 600.000MB/s transfers
> da4: Command Queueing enabled
> da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da4: quirks=0x8<4K>
> da5 at mps0 bus 0 scbus0 target 5 lun 0
> da5: <ATA WDC WD20EFRX-68E 0A80> Fixed Direct Access SCSI-6 device 
> da5: Serial Number      WD-WMC4M1226510
> da5: 600.000MB/s transfers
> da5: Command Queueing enabled
> da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da5: quirks=0x8<4K>
> Timecounter "TSC-low" frequency 1546452572 Hz quality 1000
> Root mount waiting for: usbus1 usbus0
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> ugen0.2: <vendor 0x8087> at usbus0
> uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0
> ugen1.2: <vendor 0x8087> at usbus1
> uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1
> Root mount waiting for: usbus1 usbus0
> uhub2: 6 ports with 6 removable, self powered
> uhub3: 6 ports with 6 removable, self powered
> ugen0.3: <vendor 0x0000> at usbus0
> uhub4: <vendor 0x0000 product 0x0001, class 9/0, rev 2.00/0.00, addr 3> on usbus0
> ugen1.3: <Dell> at usbus1
> ukbd0: <EP1 Interrupt> on usbus1
> kbd0 at ukbd0
> uhub4: 4 ports with 3 removable, self powered
> ugen0.4: <vendor 0x0557> at usbus0
> ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
> kbd2 at ukbd1
> ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
> ums0: 3 buttons and [Z] coordinates ID=0
> Trying to mount root from ufs:/dev/ufs/FreeNASs2a [ro]...
> GEOM_RAID5: Module loaded, version 1.1.20130907.44 (rev 5c6d2a159411)
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> GEOM_ELI: Device da0p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da1p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da2p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da3p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da4p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> GEOM_ELI: Device da5p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI:     Crypto: hardware
> igb0: link state changed to UP
> vboxdrv: fAsync=0 offMin=0x341 offMax=0xd46
> ugen1.3: <Dell> at usbus1 (disconnected)
> ukbd0: at uhub3, port 4, addr 3 (disconnected)
> svc_tli_create: could not bind to requested address
> NLM: unable to create (NLM_PROG, 0).

-- End of security output --